For what it's worth, it could be a good idea to get a gear set and bearing kit from lowrange and out it into your existing case (presuming you have a Sierra already
) Fair enough it might be a little bit more expensive but it's new
| auszookers.com https://auszookers.com/forum/ |
|
| transfer gears or 1ltr https://auszookers.com/forum/viewtopic.php?f=8&t=23956 |
Page 1 of 1 |
| Author: | 4x4zook [ Sun Jul 17, 2011 1:22 pm ] |
| Post subject: | transfer gears or 1ltr |
hi guys, looking to buy a transfer case with gears for 31s or a 1ltr transfer case. got cash waiting. cheers |
|
| Author: | Rusho [ Sun Jul 17, 2011 8:57 pm ] |
| Post subject: | Re: transfer gears or 1ltr |
For what it's worth, it could be a good idea to get a gear set and bearing kit from lowrange and out it into your existing case (presuming you have a Sierra already ) Fair enough it might be a little bit more expensive but it's new
|
|
| Author: | Fatzook [ Sun Jul 17, 2011 9:11 pm ] |
| Post subject: | Re: transfer gears or 1ltr |
Rusho wrote: Fair enough it might be a little bit more expensive but it's new
And it only takes 10-14 days. 
|
|
| Author: | 4x4zook [ Mon Jul 18, 2011 12:41 pm ] |
| Post subject: | Re: transfer gears or 1ltr |
could i put them in myslef? got a bit of mechanical experience =P and i know this is wrong thread but to keep the revs at around 3000-3300 wich gears from lowrange would be best with 31s |
|
| Author: | SierraDan [ Mon Jul 18, 2011 6:58 pm ] |
| Post subject: | Re: transfer gears or 1ltr |
I at about 4000 doing 100 with a 1ltr case. |
|
| Author: | Rusho [ Mon Jul 18, 2011 6:58 pm ] |
| Post subject: | Re: transfer gears or 1ltr |
@ 100km/hr?? Prob the 4.1's maybe the 5.1's. I have 6.5's with 30's and highway driving sits at about 4000-4100 I'm getting 31's soon which should hopefully knock it back a few hundred revs |
|
| Author: | taszook [ Tue Jul 19, 2011 6:56 am ] |
| Post subject: | Re: transfer gears or 1ltr |
i put 6.5's in my case with no real exp. done wheel bearings and that before but nothing like a tcase before. 6.5's came with instructions and photos step by step, made it fairly easy with a few tools... bearing puller and press would of made it quite a bit quicker tho haha |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|