| auszookers.com https://auszookers.com/forum/ |
|
| G16B Camshaft please *FOUND ONE, DELETE ME* https://auszookers.com/forum/viewtopic.php?f=8&t=24470 |
Page 1 of 1 |
| Author: | shane1992 [ Tue Aug 02, 2011 11:10 am ] |
| Post subject: | G16B Camshaft please *FOUND ONE, DELETE ME* |
For god sakes these are the most bullshit hardest things to get a hold of... Has any body got any out of old engines in good condition? I am getting desperate as its holding me back in my conversion... I dont want to pay $500 for a new one. |
|
| Author: | BlueSuzy [ Tue Aug 02, 2011 1:25 pm ] |
| Post subject: | Re: G16B Camshaft please |
I have a g16b Baleno one here! Engine was cooked but the shaft should be fine? |
|
| Author: | crayzeeclown [ Wed Aug 03, 2011 10:02 am ] |
| Post subject: | Re: G16B Camshaft please |
baleno ones are different hence the reason he is looking for a vitara one for a conversion |
|
| Author: | shane1992 [ Wed Aug 03, 2011 10:32 am ] |
| Post subject: | Re: G16B Camshaft please |
Thanks bluesuzy... But yeah I need a Vitara profile one... |
|
| Author: | shep [ Wed Aug 03, 2011 10:46 am ] |
| Post subject: | Re: G16B Camshaft please |
http://www.lowrangeoffroad.com/index.ph ... ckers.html |
|
| Author: | shane1992 [ Wed Aug 03, 2011 8:37 pm ] |
| Post subject: | Re: G16B Camshaft please |
shep wrote: http://www.lowrangeoffroad.com/index.php/suzuki/sidekick-tracker-x90/engine/1-6l-16v-re-grind-torquer-cam-and-modified-rockers.html
they still charge $500 for a new one..... Or $200ish for a regrind... Will work out being $500 once I send one over and and have it sent back.. Cause I need a camshaft to begin with |
|
| Author: | shep [ Wed Aug 03, 2011 8:56 pm ] |
| Post subject: | Re: G16B Camshaft please |
spewing. have you tried crow cams? http://www.crowcams.com.au/findacam.aspx |
|
| Author: | shane1992 [ Wed Aug 03, 2011 9:42 pm ] |
| Post subject: | Re: G16B Camshaft please |
I haven't... I'll send them an email today.... Suzistore quoted me $200 for a new one... Then when I wanted to buy one they said they had no stock... And now don't reply to my emails... Annoying |
|
| Author: | shane1992 [ Sat Aug 06, 2011 9:01 am ] |
| Post subject: | Re: G16B Camshaft please |
still neeed one.... |
|
| Author: | stockman [ Sat Aug 06, 2011 9:05 am ] |
| Post subject: | Re: G16B Camshaft please |
http://auszookers.com/index.php?name=Fo ... ic&t=24514 |
|
| Author: | shane1992 [ Sun Aug 07, 2011 7:08 am ] |
| Post subject: | Re: G16B Camshaft please |
Thanks Stock man, |
|
| Author: | oozuk [ Sun Aug 07, 2011 8:07 am ] |
| Post subject: | Re: G16B Camshaft please |
Have you tried Suzi auto services for a S\H cam ? |
|
| Author: | shane1992 [ Sun Aug 07, 2011 9:18 am ] |
| Post subject: | Re: G16B Camshaft please |
oozuk wrote: Have you tried Suzi auto services for a S\H cam ?
I havent... I have tried all the usual online suzuki stores, and few cam places etc... now trying to find second hand ones at wreckers etc |
|
| Author: | shane1992 [ Mon Aug 08, 2011 12:50 am ] |
| Post subject: | Re: G16B Camshaft please |
So I have a camshaft on the way now, thanks for the reccomendation Oozuk, and thanks for all the hep from other too... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|