auszookers.com
https://auszookers.com/forum/

Door grommet/slinky things from a Jimny
https://auszookers.com/forum/viewtopic.php?f=8&t=25375
Page 1 of 1

Author:  SLYjoel [ Sat Sep 03, 2011 12:26 am ]
Post subject:  Door grommet/slinky things from a Jimny

So, I have NFI what you actually call them, but I need both rubber door grommet/protector thingos that run from the body to the doors that the electrical cables run through.

I have a 99 Jimny with manual mirrors and windows, but to mount my speakers on the door I need something to protect the cables.

I've spoken with Suzuki spare parts, and I'd have to buy a complete door loom for $130 a side and chop it up, hardly ideal.


So, if you're wrecking a Jimny and have these two parts I want them!


Thanks!

Author:  squizzytaylor [ Sat Sep 03, 2011 12:30 am ]
Post subject:  Re: Door grommet/slinky things from a Jimny

A couple of grommets and some conduit will do the same job if you get stuck.

Author:  TZAR [ Sat Sep 03, 2011 1:00 am ]
Post subject:  Re: Door grommet/slinky things from a Jimny

Pick a part wreckers

open doors of cars and look for them

gently pry them out then cut the wiring and put in your pocket. free :-) :-)

get a few for different sizes

Author:  SLYjoel [ Mon Sep 05, 2011 12:27 am ]
Post subject:  Re: Door grommet/slinky things from a Jimny

Pick a part/U-Pull-It was going to be my next port of call if no one on here had some handy.

Hopefully some other random Zook shares the same part.

Author:  atari4x4 [ Mon Sep 05, 2011 12:35 am ]
Post subject:  Re: Door grommet/slinky things from a Jimny

have a look at the swifts/barina's

Author:  SLYjoel [ Mon Sep 05, 2011 4:28 am ]
Post subject:  Re: Door grommet/slinky things from a Jimny

atari4x4 wrote:
have a look at the swifts/barina's


Noted :wink:

Author:  SLYjoel [ Sun Sep 11, 2011 6:49 am ]
Post subject:  Re: Door grommet/slinky things from a Jimny

Went to U-Pull-It.

Looked through as many cars as I could, Suzuki's or not.

Couldn't find a thing, so I'll call a suzuki specific wrecker tomorrow.

But in the mean time, if you have these parts, let me know!

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/