| auszookers.com https://auszookers.com/forum/ |
|
| Jimny Rear 4.3 ring and pinion/Vit front https://auszookers.com/forum/viewtopic.php?f=8&t=26276 |
Page 1 of 1 |
| Author: | Bugsta [ Fri Sep 30, 2011 6:52 am ] |
| Post subject: | Jimny Rear 4.3 ring and pinion/Vit front |
I think I've stripped some teeth on my rear diff again. It hasn't completely destroyed itself yet but it went from nothing to embarrassing in a matter of minutes so its on its way. I limped it home and parked it. I'll pull it out tomorrow. So anyone got either a 4.3 Jimny rear diff or Vit front R&P from a conversion? |
|
| Author: | want33s [ Sat Oct 01, 2011 1:12 am ] |
| Post subject: | Re: Jimny Rear 4.3 ring and pinion/Vit front |
I might have a Vit front diff. I'm not sure of the ratio. I'll ring the guy that has it and let you know. Jas. |
|
| Author: | Bugsta [ Sat Oct 01, 2011 6:00 am ] |
| Post subject: | Re: Jimny Rear 4.3 ring and pinion/Vit front |
It is confirmed. Broken tooth on pinion and damaged the crown of course. I have removed the crown and refit the diff so I can at least drive it FWD. |
|
| Author: | Bugsta [ Sun Oct 02, 2011 1:19 am ] |
| Post subject: | Re: Jimny Rear 4.3 ring and pinion/Vit front |
What years/models Vitara has the 4.3 front diff? |
|
| Author: | christover1 [ Mon Oct 03, 2011 8:45 pm ] |
| Post subject: | Re: Jimny Rear 4.3 ring and pinion/Vit front |
Bugsta wrote: What years/models Vitara has the 4.3 front diff?
The GV front steel diff I used under my vit had a 4:3 in it. Unsure of the year. Sold it to a Jimny owner already sorry. |
|
| Author: | Bugsta [ Mon Oct 03, 2011 10:03 pm ] |
| Post subject: | Re: Jimny Rear 4.3 ring and pinion/Vit front |
Was it me 12 months ago |
|
| Author: | christover1 [ Mon Oct 03, 2011 10:05 pm ] |
| Post subject: | Re: Jimny Rear 4.3 ring and pinion/Vit front |
Bugsta wrote: Was it me 12 months ago
Did you break it |
|
| Author: | Bugsta [ Tue Oct 04, 2011 4:14 am ] |
| Post subject: | Re: Jimny Rear 4.3 ring and pinion/Vit front |
Nah wasn't you I bought it from. Was Darkhorse. Still, as always, in Brisbane. |
|
| Author: | Bugsta [ Wed Oct 05, 2011 8:38 am ] |
| Post subject: | Re: Jimny Rear 4.3 ring and pinion/Vit front |
want33s wrote: I might have a Vit front diff. I'm not sure of the ratio.
I'll ring the guy that has it and let you know. Jas. Any news Jason? |
|
| Author: | Bugsta [ Wed Oct 12, 2011 12:08 pm ] |
| Post subject: | Re: Jimny Rear 4.3 ring and pinion/Vit front |
bump Still on the lookout. I can get a steel Vit diff for $550 but reckon I shouldn't have to spend anywhere near that much. |
|
| Author: | kyzermattingley [ Sun Oct 16, 2011 11:59 pm ] |
| Post subject: | Re: Jimny Rear 4.3 ring and pinion/Vit front |
I have a rear center here ATM, not sure of the ratio, it's out of a 2006'ish manual Jimny, been keeping it for mine, it's in a box ready to go $200 Kyzer |
|
| Author: | Bugsta [ Tue Oct 18, 2011 5:13 am ] |
| Post subject: | Re: Jimny Rear 4.3 ring and pinion/Vit front |
PM sent |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|