auszookers.com
https://auszookers.com/forum/

Clutch suzuki 4x4
https://auszookers.com/forum/viewtopic.php?f=8&t=26700		 Page 1 of 1
Author:  Haydzzz [ Wed Oct 12, 2011 8:37 am ]
Post subject:  Clutch suzuki 4x4
Whats a clutch kit worth and were bris?
Author:  85Drover [ Wed Oct 12, 2011 8:39 am ]
Post subject:  Re: Clutch suzuki 4x4
Depends on what vehicle, what application you are going to be using the car for (4wding mainly, street mainly etc), where you buy it from and what brand.

A standard Exedy clutch kit for my LWB Vitara was $150 new from a local parts dealer here in Cairns, that included pressure plate, clutch plate, and throwout bearing. Then it cost a further $30 to get my flywheel machined.

Hope this helps.
Author:  mongrelzook [ Wed Oct 12, 2011 8:41 am ]
Post subject:  Re: Clutch suzuki 4x4
Need more details fella.
Although I got mine fr $210 at nicks performance clutches.
Author:  whincup [ Wed Oct 12, 2011 9:37 am ]
Post subject:  Re: Clutch suzuki 4x4
85Drover wrote:
Depends on what vehicle, what application you are going to be using the car for (4wding mainly, street mainly etc), where you buy it from and what brand.

A standard Exedy clutch kit for my LWB Vitara was $150 new from a local parts dealer here in Cairns, that included pressure plate, clutch plate, and throwout bearing. Then it cost a further $30 to get my flywheel machined.

Hope this helps.


8O my sierra's was $210 (standard clutch), then quoted $65 for flywheel machine... but they had a 2 week wait so i paid another bloke $100...
Author:  Haydzzz [ Wed Oct 12, 2011 10:05 am ]
Post subject:  Re: Clutch suzuki 4x4
Yea for my sierra
Author:  607CHA [ Wed Oct 12, 2011 10:26 am ]
Post subject:  Re: Clutch suzuki 4x4
Is it geared? If so you might ne able to get away with a standard. Or go HD and buy a few spare clutch cable's
Author:  Haydzzz [ Wed Oct 12, 2011 6:50 pm ]
Post subject:  Re: Clutch suzuki 4x4
Ok sweet thanks guys
Author:  overlander74 [ Wed Oct 12, 2011 8:07 pm ]
Post subject:  Re: Clutch suzuki 4x4
try Slacks Creek Brake and clutch. i always found them good on price and service. (07) 3808 8193
Author:  Haydzzz [ Wed Oct 12, 2011 11:23 pm ]
Post subject:  Re: Clutch suzuki 4x4
Thanks bud rang them very cheap
Author:  Bugsta [ Thu Oct 13, 2011 12:02 am ]
Post subject:  Re: Clutch suzuki 4x4
I got mine from NPC. $300 + machinining and bearings (recommended). Exedy with 40% more plate pressure with negligible difference to pedal. Am loving it. Does not smell like the OEM when slipped on the road when worked.
Author:  Haydzzz [ Thu Oct 13, 2011 7:29 pm ]
Post subject:  Re: Clutch suzuki 4x4
Doing my clutch u dont need to do the flywheel? How can u tell?
Author:  evolution [ Fri Oct 14, 2011 3:10 am ]
Post subject:  Re: Clutch suzuki 4x4
You always get the fly wheel machined when fitting a new clutch it removes any hot spots or high points will give you maximum life out of your clutch
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/