| auszookers.com https://auszookers.com/forum/ |
|
| NT, WT swivel hub (wtd) https://auszookers.com/forum/viewtopic.php?f=8&t=26717 |
Page 1 of 1 |
| Author: | Mubby [ Thu Oct 13, 2011 7:00 am ] |
| Post subject: | NT, WT swivel hub (wtd) |
Alright im looking at upgrading my hubs on my lj81 stockman and im looking for these bits.. -need a pair of SJ swivel hubs. Any leaf sprung SJ, want with diskbrakes and callipers. (not coily though) -need a pair of SJ410 CV joints. Looking to buy within the next 2 weeks. So please, leave me what bits you have and what condition and how much. Or if you have all the bits i need please PM me. Thanks Nick 
|
|
| Author: | Ruthless [ Thu Oct 13, 2011 7:01 am ] |
| Post subject: | Re: NT, WT swivel hub (wtd) |
talk to either highway star or 2stroker they are your best bet |
|
| Author: | 303zuke [ Thu Oct 13, 2011 11:52 am ] |
| Post subject: | Re: NT, WT swivel hub (wtd) |
Or Want33s, be a better bet. 1.0lt CVs are available new on E-Bay |
|
| Author: | Highway-Star [ Thu Oct 13, 2011 8:44 pm ] |
| Post subject: | Re: NT, WT swivel hub (wtd) |
Ruthless wrote: talk to either highway star or 2stroker they are your best bet
Yeah Nathan, not me. Most of the ones I have left are in a pretty bad state. I've disk braked 4 LJ front ends in just over 12 months... I still have about 11 or 12 CV's on 80 shafts, but I technically gave them all to my father for his project he is doing nothing on..... 
As 303 said, I'd see Want33's about the hubs. As for the CV's, I know 3cyl bought a pair off ebay way back, and they didn't fit in the swivel hub properly.... I think he said they were too long?  He did get his money back though...
|
|
| Author: | Boggomobile [ Thu Oct 13, 2011 8:57 pm ] |
| Post subject: | Re: NT, WT swivel hub (wtd) |
Hi All Mubby, I have a LJ81 front diff assembly that I converted to discs and am happy to sell complete, the only thing missing is the calipers. How does $150.00 sound? Also I have a collection of secondhand LJ50, LJ80 and1.0L Sierra CV's that you use for the conversion for sale. Cheers Greg 0428 789854 |
|
| Author: | LittleJeep [ Thu Oct 13, 2011 9:48 pm ] |
| Post subject: | Re: NT, WT swivel hub (wtd) |
i have 3 good condition 1L CV's i don't need. PM me if ya want them. also 3cyl has some custom 4140 shafts with a 26 spline inner (same spline as rear diff) and an outer that matches the CroMo CV's that you buy for sierra's. these are practically* unbreakable! (i.e. no-one has broken one yet, and they get a thrashing just about every weekend!) * i say practically because anything could become possible |
|
| Author: | Highway-Star [ Thu Oct 13, 2011 10:02 pm ] |
| Post subject: | Re: NT, WT swivel hub (wtd) |
LittleJeep wrote: i have 3 good condition 1L CV's i don't need. PM me if ya want them.
also 3cyl has some custom 4140 shafts with a 26 spline inner (same spline as rear diff) and an outer that matches the CroMo CV's that you buy for sierra's. these are practically* unbreakable! (i.e. no-one has broken one yet, and they get a thrashing just about every weekend!) * i say practically because anything could become possible Col, do you know if there were any Hy-Tuf ones left? Or are all the remaining ones Chromo? |
|
| Author: | mrw82 [ Thu Oct 13, 2011 10:25 pm ] |
| Post subject: | Re: NT, WT swivel hub (wtd) |
get onto nbs forum. Last week there was a guy at ipswich selling a few 1 litre diffs complete. One was a disk brake front. |
|
| Author: | 2stroker [ Fri Oct 14, 2011 1:00 am ] |
| Post subject: | Re: NT, WT swivel hub (wtd) |
Hey Nick you must have forgot me, I got all the bits out for you and have everything that you want, sitting here waiting for you. |
|
| Author: | Mubby [ Fri Oct 14, 2011 1:04 am ] |
| Post subject: | Re: NT, WT swivel hub (wtd) |
ahhhh! Sorry 2stroker i just had'nt heard back so i wasnt sure.. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|