| auszookers.com https://auszookers.com/forum/ |
|
| 4.11 rear diff https://auszookers.com/forum/viewtopic.php?f=8&t=26844 |
Page 1 of 1 |
| Author: | smiffkid [ Mon Oct 17, 2011 9:28 am ] |
| Post subject: | 4.11 rear diff |
to suit jimny or sierra have snapped a pinion tooth and need 1 before the locker can go in If it already has a locker thats fine cause it can be used in th next project |
|
| Author: | masterA [ Mon Oct 17, 2011 11:14 am ] |
| Post subject: | Re: 4.11 rear diff |
I think MrRocky had some for sale not too long ago?! |
|
| Author: | smiffkid [ Mon Oct 17, 2011 12:07 pm ] |
| Post subject: | Re: 4.11 rear diff |
yea but its front and rear and a front sierra 1 is no good to me |
|
| Author: | alien [ Mon Oct 17, 2011 12:08 pm ] |
| Post subject: | Re: 4.11 rear diff |
buy both, sell the sierra front on ebay/gumtree/at your work? |
|
| Author: | smiffkid [ Mon Oct 17, 2011 12:22 pm ] |
| Post subject: | Re: 4.11 rear diff |
chuck it in your car aron will be nuts |
|
| Author: | alien [ Mon Oct 17, 2011 12:39 pm ] |
| Post subject: | Re: 4.11 rear diff |
haha a 4.1 front and 3.7 rear... nice =) |
|
| Author: | smiffkid [ Mon Oct 17, 2011 8:25 pm ] |
| Post subject: | Re: 4.11 rear diff |
yea will make for awesome climbing |
|
| Author: | christover1 [ Mon Oct 17, 2011 8:47 pm ] |
| Post subject: | Re: 4.11 rear diff |
4:1 is the ratio found in 1.0 litre Sierras. They dont fit Sierra 1.3 diffs, so may not be what you need? But the Maruti has a 4:1 option (I'm told but don't know) that is same/similar to wide track Sierra. But a bit rarer to find. I have 1.0 litre diffs in Melbourne, Which I believe are in ok nick, if you have no luck closer. |
|
| Author: | smiffkid [ Tue Oct 18, 2011 8:54 am ] |
| Post subject: | Re: 4.11 rear diff |
have hopefully sourced a brand new 4.11 ring and pinion we had at work will test in tonight and see wat happens other wise ill grab MRrockys set and go from there |
|
| Author: | Bugsta [ Tue Oct 18, 2011 10:49 pm ] |
| Post subject: | Re: 4.11 rear diff |
Might be a silly question - but will a front diff work in the rear, even being High pinion... and front. Do they work in opposite rotations? |
|
| Author: | zooker [ Wed Oct 19, 2011 7:21 am ] |
| Post subject: | Re: 4.11 rear diff |
If the one you found doesn't work, I've got a 4.11 ring and pinion out of my old WT maruti sitting around somewhere. Let me know. |
|
| Author: | smiffkid [ Wed Oct 19, 2011 8:27 am ] |
| Post subject: | Re: 4.11 rear diff |
the 1 i found doens work so next is a second hand set from some where the front diff is smaller then the rear so if im already snapping the rear i want to improve it buy butting something stronger in |
|
| Author: | evolution [ Wed Oct 19, 2011 10:23 am ] |
| Post subject: | Re: 4.11 rear diff |
I have some auto vitara diffs not sure if you could use the ratios out of there have been told that guys swap them into sierras |
|
| Author: | christover1 [ Wed Oct 19, 2011 10:33 am ] |
| Post subject: | Re: 4.11 rear diff |
Front Vitara diffs do go into Sierras front or rear easily. Rear Vitara dont fit Sierras. No idea how that goes with Jimnys. |
|
| Author: | smiffkid [ Wed Oct 19, 2011 12:29 pm ] |
| Post subject: | Re: 4.11 rear diff |
just used a complete sierra rear centre fit no worries just had to change the flange over so problem sloved wish the front was as easy |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|