use a hammer to make em sit straight then tek screw em on
| auszookers.com https://auszookers.com/forum/ |
|
| someone to cover my vitara door sills https://auszookers.com/forum/viewtopic.php?f=8&t=27295 |
Page 1 of 1 |
| Author: | swifty_ano [ Tue Nov 01, 2011 5:04 am ] |
| Post subject: | someone to cover my vitara door sills |
Ok now I'm just wanting a cover to hide the holes in my door sills. And the dints. Just thinking some think aluminium plating pot riveted or welded on. Can anyone suggest someone who can do it for me? Want it done ASAP. Not looking for rock sliders just a cover like they do on sierras. Location around Brisbane/sunny coast. |
|
| Author: | buzbox [ Tue Nov 01, 2011 5:34 am ] |
| Post subject: | Re: someone to cover my vitara door sills |
DIY !! If you have a tape measure, a permanet marker, checker plate or similar a grinder with a cutting disc, drill, pop rivet gun, rivets and a rubber mallet, It would be piss easy to do. You can buy the aluminium checker / diamond plate from bunnings, Cut a couple of strips, drill and rivet them into place, bend the plate over drill and rivet underneath. I would use steel but that's how I'd do it anyways. Oh and I'd bog up the existing holes first to prevent dust dirt mud getting in which may result in rust and run a few beads of sikaflex to seal it. |
|
| Author: | swifty_ano [ Tue Nov 01, 2011 6:26 pm ] |
| Post subject: | Re: someone to cover my vitara door sills |
Yes this is true. I was wanting to do it myself but I just bought some flares and was hoping to get the plating to mate into those. :$ |
|
| Author: | alexvitara [ Tue Nov 01, 2011 8:24 pm ] |
| Post subject: | Re: someone to cover my vitara door sills |
Most sheetys will do it for you |
|
| Author: | atari4x4 [ Tue Nov 01, 2011 9:17 pm ] |
| Post subject: | Re: someone to cover my vitara door sills |
pics of the sill panel damage, why can't you just put the platic trims back on the hid the dents? |
|
| Author: | swifty_ano [ Tue Nov 01, 2011 11:00 pm ] |
| Post subject: | Re: someone to cover my vitara door sills |
Plastic trim didn't sit straight. It's why I took it off |
|
| Author: | alexvitara [ Wed Nov 02, 2011 8:50 am ] |
| Post subject: | Re: someone to cover my vitara door sills |
use a hammer to make em sit straight then tek screw em on
|
|
| Author: | swifty_ano [ Thu Nov 10, 2011 3:17 am ] |
| Post subject: | Re: someone to cover my vitara door sills |
So fatzook won't reply to my emails or pm's . So hopefully someone out there is interested |
|
| Author: | 2stroker [ Thu Nov 10, 2011 10:05 pm ] |
| Post subject: | Re: someone to cover my vitara door sills |
You have a PM |
|
| Author: | swifty_ano [ Mon Nov 21, 2011 7:00 am ] |
| Post subject: | Re: someone to cover my vitara door sills |
More please |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|