auszookers.com
https://auszookers.com/forum/

more urgent stuff 50mm nuts inside where hub goes front bris
https://auszookers.com/forum/viewtopic.php?f=8&t=28657		 Page 1 of 1
Author:  CompTruck [ Thu Dec 15, 2011 8:24 am ]
Post subject:  more urgent stuff 50mm nuts inside where hub goes front bris
hi guys. i need to get the 2 big nuts that are inside where you take the front hubs off. think they hold the wheel bearing in? im on brisbane northside. hope to get em tomorrow off yas lol

can pm me or sms on 0449 140 132
Author:  remydog05 [ Thu Dec 15, 2011 8:42 am ]
Post subject:  Re: more urgent stuff 50mm nuts inside where hub goes front bris
CompTruck wrote:
hi guys. i need to get the 2 big nuts that are inside where you take the front hubs off. think they hold the wheel bearing in? im on brisbane northside. hope to get em tomorrow off yas lol

can pm me or sms on 0449 140 132


PM Want 33's he will look after ya!
Author:  CompTruck [ Thu Dec 15, 2011 8:43 am ]
Post subject:  Re: more urgent stuff 50mm nuts inside where hub goes front bris
yeah heel have em but so far away for couple o bolts haha
Author:  royce [ Thu Dec 15, 2011 8:44 am ]
Post subject:  Re: more urgent stuff 50mm nuts inside where hub goes front bris
buy some swivel hub kits, they come wit new ones
Author:  Fatzook [ Thu Dec 15, 2011 8:53 am ]
Post subject:  Re: more urgent stuff 50mm nuts inside where hub goes front bris
royce wrote:
buy some swivel hub kits, they come wit new ones


Mine never have. I've bought quite a few kits, and all I have gotten is the locking shim with the bendy tabs. :?
Author:  Bruce [ Thu Dec 15, 2011 8:54 am ]
Post subject:  Re: more urgent stuff 50mm nuts inside where hub goes front bris
Fatzook wrote:
royce wrote:
buy some swivel hub kits, they come wit new ones


Mine never have. I've bought quite a few kits, and all I have gotten is the locking shim with the bendy tabs. :?


Ya buying the wrong kits then :wink:
Author:  CompTruck [ Thu Dec 15, 2011 8:57 am ]
Post subject:  Re: more urgent stuff 50mm nuts inside where hub goes front bris
you got any bruce mate?
Author:  Fatzook [ Thu Dec 15, 2011 8:59 am ]
Post subject:  Re: more urgent stuff 50mm nuts inside where hub goes front bris
Bruce wrote:
Fatzook wrote:
royce wrote:
buy some swivel hub kits, they come wit new ones


Mine never have. I've bought quite a few kits, and all I have gotten is the locking shim with the bendy tabs. :?


Ya buying the wrong kits then :wink:


Lowrange :roll:

I have a weaves kit here also...... bupkiss!
Author:  Bruce [ Thu Dec 15, 2011 9:02 am ]
Post subject:  Re: more urgent stuff 50mm nuts inside where hub goes front bris
CompTruck wrote:
you got any bruce mate?


No
Author:  Bruce [ Thu Dec 15, 2011 9:06 am ]
Post subject:  Re: more urgent stuff 50mm nuts inside where hub goes front bris
Fatzook wrote:
Bruce wrote:
Fatzook wrote:
royce wrote:
buy some swivel hub kits, they come wit new ones


Mine never have. I've bought quite a few kits, and all I have gotten is the locking shim with the bendy tabs. :?


Ya buying the wrong kits then :wink:


Lowrange :roll:

I have a weaves kit here also...... bupkiss!


http://www.ebay.com.au/itm/Swivel-Wheel ... 35ab1fd43e
:roll:
Not that I buy that but that was a 2 min look :wink:
Author:  Fatzook [ Thu Dec 15, 2011 9:10 am ]
Post subject:  Re: more urgent stuff 50mm nuts inside where hub goes front bris
Bruce wrote:
Fatzook wrote:
Bruce wrote:
Fatzook wrote:
royce wrote:
buy some swivel hub kits, they come wit new ones


Mine never have. I've bought quite a few kits, and all I have gotten is the locking shim with the bendy tabs. :?


Ya buying the wrong kits then :wink:


Lowrange :roll:

I have a weaves kit here also...... bupkiss!


http://www.ebay.com.au/itm/Swivel-Wheel ... 35ab1fd43e
:roll:
Not that I buy that but that was a 2 min look :wink:


SOOOO CHEAP!!!! Probably recycled bearings from india :lol:

But it does have the nut thingys :wink:
Author:  mrw82 [ Thu Dec 15, 2011 9:13 am ]
Post subject:  Re: more urgent stuff 50mm nuts inside where hub goes front bris
Bruce wrote:

http://www.ebay.com.au/itm/Swivel-Wheel ... 35ab1fd43e
:roll:
Not that I buy that but that was a 2 min look :wink:


thats a bloody good price for a full kit for wheel bearings, kingpins and swivel hub seals.
Author:  Bruce [ Thu Dec 15, 2011 9:18 am ]
Post subject:  Re: more urgent stuff 50mm nuts inside where hub goes front bris
mrw82 wrote:
Bruce wrote:

http://www.ebay.com.au/itm/Swivel-Wheel ... 35ab1fd43e
:roll:
Not that I buy that but that was a 2 min look :wink:


thats a bloody good price for a full kit for wheel bearings, kingpins and swivel hub seals.


I know that :roll: And he's a really nice guy as well.
Having beers with him soon when he's up here for holidays :wink:
Author:  bohuler [ Thu Dec 15, 2011 9:29 am ]
Post subject:  Re: more urgent stuff 50mm nuts inside where hub goes front bris
I have spare nuts under the house, might not get them to you tomorrow, but can post them and you'll get them monday. Yours for $20 express posted to ya!
Dave
Author:  2stroker [ Thu Dec 15, 2011 12:50 pm ]
Post subject:  Re: more urgent stuff 50mm nuts inside where hub goes front
I will have some here in North Brisbane pm me your number
Author:  weaves [ Thu Dec 15, 2011 1:22 pm ]
Post subject:  Re: more urgent stuff 50mm nuts inside where hub goes front bris
Fatzook wrote:
Bruce wrote:
Fatzook wrote:
Bruce wrote:
Fatzook wrote:
royce wrote:
buy some swivel hub kits, they come wit new ones


Mine never have. I've bought quite a few kits, and all I have gotten is the locking shim with the bendy tabs. :?


Ya buying the wrong kits then :wink:


Lowrange :roll:

I have a weaves kit here also...... bupkiss!


http://www.ebay.com.au/itm/Swivel-Wheel ... 35ab1fd43e
:roll:
Not that I buy that but that was a 2 min look :wink:


SOOOO CHEAP!!!! Probably recycled bearings from india :lol:

But it does have the nut thingys :wink:


A company called UBC is doing heaps cheap kits at the moment, all chinese bearings and seals. They have hilux and patrol gear on the shelf (i know this for a fact as he was trying to sell them to me last week). Not sure on the zook stuff, but I'm sure they do the parts separately anyway.

My cost price on the kits i supply and their kits its half. If a hilux swivel hub kit costs me 100 to purchase, the chinese one is 50. Its not something I'm willing to supply unless they are asked for, and we are often asked for the cheapest possible :roll:
Author:  OFFROAD_SOLUTIONS [ Thu Dec 15, 2011 2:56 pm ]
Post subject:  Re: more urgent stuff 50mm nuts inside where hub goes front bris
Jason (want33s) visits Brisbane northside every Friday. If you get a hold of him before he leaves he might be able to throw them in
Author:  slowsierra [ Thu Dec 15, 2011 6:12 pm ]
Post subject:  Re: more urgent stuff 50mm nuts inside where hub goes front bris
Bruce wrote:
Fatzook wrote:
Bruce wrote:
Fatzook wrote:
royce wrote:
buy some swivel hub kits, they come wit new ones


Mine never have. I've bought quite a few kits, and all I have gotten is the locking shim with the bendy tabs. :?


Ya buying the wrong kits then :wink:


Lowrange :roll:

I have a weaves kit here also...... bupkiss!


http://www.ebay.com.au/itm/Swivel-Wheel ... 35ab1fd43e
:roll:
Not that I buy that but that was a 2 min look :wink:


Has anyone used this guys kits? just brought a kit yesterday cause it was the only one that had everything. it didn't say what brand the bearings where in it so i hope they are ok.

on a side note is it a 50mm socket i need?? i normally use a screw driver and hammer to undo it just thinking the right tool for the job would be better.
Author:  2stroker [ Thu Dec 15, 2011 8:02 pm ]
Post subject:  Re: more urgent stuff 50mm nuts inside where hub goes front
You can buy a specific wheel bearing socket for around 420 or a normal 50mm socket from omwhere lik trade tools, they are not that expensive and is a good investment.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/