auszookers.com
https://auszookers.com/forum/

LJ stuff wanted. W.A
https://auszookers.com/forum/viewtopic.php?f=8&t=28754		 Page 1 of 1
Author:  sideways [ Sun Dec 18, 2011 2:32 pm ]
Post subject:  LJ stuff wanted. W.A
I'm after....

An LJ80-1 front panel, as in non-Stockman. I want the metal panel, not the plastic grill. The panel on mine is all cracked and the grill is fine, how backwards is that?! :crazy:

LJ50 transfer case, 3:1 low, 1.7:1 high.

LJ81 windscreen rubber.

LJ80 door mirror, just need the mirror, not the arm bit.

I'l Add more when I think of/find it. :helloo:

Thanks

Hayden
Author:  masterA [ Sun Dec 18, 2011 11:02 pm ]
Post subject:  Re: LJ stuff wanted. W.A
I've seen a couple of LJ's at SuziStore sitting at the front....may pay to give them a call ;)
Author:  3cyl [ Mon Dec 19, 2011 8:03 am ]
Post subject:  Re: LJ stuff wanted. W.A
If you can salvage the radiator support (inner) panel you can reskin the front panel, that's what I ended up doing.
Author:  sideways [ Wed Dec 21, 2011 5:56 pm ]
Post subject:  Re: LJ stuff wanted. W.A
masterA wrote:
I've seen a couple of LJ's at SuziStore sitting at the front....may pay to give them a call ;)


Thanks, will do. :)

3cyl wrote:
If you can salvage the radiator support (inner) panel you can reskin the front panel, that's what I ended up doing.


Both the inner and the outer panel are cracked, the inner probably repairable so but the outer is a bit bent and rusty too. Still need the outer bit for that, I've only got crappy Stockman panels and they're completely different.

I don't mind if someone in the eastern states has one and wants to post it over. :helloo:

Got some universal windscreen rubber. 8)
Author:  Cayden [ Fri Dec 23, 2011 10:35 pm ]
Post subject:  Re: LJ stuff wanted. W.A
I can get the mirror
Author:  Highway-Star [ Sat Dec 24, 2011 6:43 am ]
Post subject:  Re: LJ stuff wanted. W.A
sideways wrote:
masterA wrote:
I've seen a couple of LJ's at SuziStore sitting at the front....may pay to give them a call ;)


Thanks, will do. :)

3cyl wrote:
If you can salvage the radiator support (inner) panel you can reskin the front panel, that's what I ended up doing.


Both the inner and the outer panel are cracked, the inner probably repairable so but the outer is a bit bent and rusty too. Still need the outer bit for that, I've only got crappy Stockman panels and they're completely different.

I don't mind if someone in the eastern states has one and wants to post it over. :helloo:

Got some universal windscreen rubber. 8)



I'll swap you! :helloo: I got a really awesome one which my father is happy to use, but yours will save him tonnes of work! :lol:
Author:  sideways [ Tue Dec 27, 2011 6:18 pm ]
Post subject:  Re: LJ stuff wanted. W.A
Cayden wrote:
I can get the mirror


I'l send you a PM in approximately 4 hours! :D

Highway-Star wrote:
sideways wrote:
masterA wrote:
I've seen a couple of LJ's at SuziStore sitting at the front....may pay to give them a call ;)


Thanks, will do. :)

3cyl wrote:
If you can salvage the radiator support (inner) panel you can reskin the front panel, that's what I ended up doing.


Both the inner and the outer panel are cracked, the inner probably repairable so but the outer is a bit bent and rusty too. Still need the outer bit for that, I've only got crappy Stockman panels and they're completely different.

I don't mind if someone in the eastern states has one and wants to post it over. :helloo:

Got some universal windscreen rubber. 8)



I'll swap you! :helloo: I got a really awesome one which my father is happy to use, but yours will save him tonnes of work! :lol:


Okay! 8O :helloo: Got pics? Mine comes pre-bent. :lol:

Mine has a Corolla radiator in it and I can't tell if it's been chopped or not to fit it in(I don't think it has, but it's been very nicely done) , so it may be a bit of a pain for you to use? I'l grab some pics when I pull it out.

Thanks

Hayden
Author:  Highway-Star [ Wed Dec 28, 2011 7:38 am ]
Post subject:  Re: LJ stuff wanted. W.A
sideways wrote:
Highway-Star wrote:
sideways wrote:
masterA wrote:
I've seen a couple of LJ's at SuziStore sitting at the front....may pay to give them a call ;)


Thanks, will do. :)

3cyl wrote:
If you can salvage the radiator support (inner) panel you can reskin the front panel, that's what I ended up doing.


Both the inner and the outer panel are cracked, the inner probably repairable so but the outer is a bit bent and rusty too. Still need the outer bit for that, I've only got crappy Stockman panels and they're completely different.

I don't mind if someone in the eastern states has one and wants to post it over. :helloo:

Got some universal windscreen rubber. 8)



I'll swap you! :helloo: I got a really awesome one which my father is happy to use, but yours will save him tonnes of work! :lol:


Okay! 8O :helloo: Got pics? Mine comes pre-bent. :lol:

Mine has a Corolla radiator in it and I can't tell if it's been chopped or not to fit it in(I don't think it has, but it's been very nicely done) , so it may be a bit of a pain for you to use? I'l grab some pics when I pull it out.

Thanks

Hayden



I was being a bit sarcastic with the "awesome" bit.... I just think your front panel looks pretty good. Anyway I'll try to get some photos later in the week if you want (feel free to PM or email me if I forget)... best way I can describe the panel is concave...
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/