has any one got one i may have slighlt bent mine 90 degrees
the joys of too much power with a 4age
cheers nathan
| auszookers.com https://auszookers.com/forum/ |
|
| metal transfer bracket on passenger side brisbane https://auszookers.com/forum/viewtopic.php?f=8&t=28811 |
Page 1 of 1 |
| Author: | Ruthless [ Tue Dec 20, 2011 1:46 am ] |
| Post subject: | metal transfer bracket on passenger side brisbane |
has any one got one i may have slighlt bent mine 90 degrees the joys of too much power with a 4age
cheers nathan
|
|
| Author: | Ruthless [ Tue Dec 20, 2011 1:50 am ] |
| Post subject: | Re: metal transfer bracket on passenger side brisbane |
and for anyone interested in how the fuck i did it i was being a nice bloke and helped a land barge get unstuck at ripleys saturday night who goes out by yourself and then does the harder tracks in a stock cruiser ute 
|
|
| Author: | Rusho [ Tue Dec 20, 2011 2:14 am ] |
| Post subject: | Re: metal transfer bracket on passenger side brisbane |
How soon do you want it?? I have some but they are being used to hold my transfer in at the moment. |
|
| Author: | Ruthless [ Tue Dec 20, 2011 2:16 am ] |
| Post subject: | Re: metal transfer bracket on passenger side brisbane |
trying to chase one for when i go wheeling boxing day it should be right till then |
|
| Author: | Scrawny [ Tue Dec 20, 2011 2:17 am ] |
| Post subject: | Re: metal transfer bracket on passenger side brisbane |
Ruthless wrote: trying to chase one for when i go wheeling boxing day it should be right till then
Camo 3 won't be done any time soon so you might as well keep looking
|
|
| Author: | Ruthless [ Tue Dec 20, 2011 2:20 am ] |
| Post subject: | Re: metal transfer bracket on passenger side brisbane |
worst case ill pull it off straighten it and weld heaps of bracing everywhere and hope it holds up but thanks anyway |
|
| Author: | Rusho [ Tue Dec 20, 2011 2:20 am ] |
| Post subject: | Re: metal transfer bracket on passenger side brisbane |
Scrawn wrote: Ruthless wrote: trying to chase one for when i go wheeling boxing day it should be right till then Camo 3 won't be done any time soon so you might as well keep looking Camo 3 is still better than no Camo 3  I'll try get it out this arvo and let you know 
|
|
| Author: | atari4x4 [ Tue Dec 20, 2011 2:20 am ] |
| Post subject: | Re: metal transfer bracket on passenger side brisbane |
Scrawn wrote: Ruthless wrote: trying to chase one for when i go wheeling boxing day it should be right till then Camo 3 won't be done any time soon so you might as well keep looking I'm just going to leave this here....  Rusho wrote: atari4x4 wrote: royce wrote: stockman wrote: Camo is an '07 UFP too Camo predates this entire forum  i feel sorry for Rusho now... is camo3 is going to be another 5+ year project. It will be completed before the end of 2011 |
|
| Author: | Rusho [ Tue Dec 20, 2011 2:29 am ] |
| Post subject: | Re: metal transfer bracket on passenger side brisbane |
atari4x4 wrote: Scrawn wrote: Ruthless wrote: trying to chase one for when i go wheeling boxing day it should be right till then Camo 3 won't be done any time soon so you might as well keep looking I'm just going to leave this here.... Rusho wrote: atari4x4 wrote: royce wrote: stockman wrote: Camo is an '07 UFP too Camo predates this entire forum i feel sorry for Rusho now... is camo3 is going to be another 5+ year project. It will be completed before the end of 2011 I still have 11 more days
|
|
| Author: | Ruthless [ Wed Dec 21, 2011 9:28 pm ] |
| Post subject: | Re: metal transfer bracket on passenger side brisbane |
still looking for one
|
|
| Author: | tanshi [ Wed Dec 21, 2011 9:36 pm ] |
| Post subject: | Re: metal transfer bracket on passenger side brisbane |
just bend up a piece of 10mm plate and make one |
|
| Author: | Ruthless [ Wed Dec 21, 2011 9:52 pm ] |
| Post subject: | Re: metal transfer bracket on passenger side brisbane |
tanshi wrote: just bend up a piece of 10mm plate and make one
i was going to bend mine straight and weld 10mm plate all over it to brace it but then i wont have a weak spot and ill blow heaps of transfer mounts again 
|
|
| Author: | tanshi [ Wed Dec 21, 2011 10:08 pm ] |
| Post subject: | Re: metal transfer bracket on passenger side brisbane |
bolt through transfer mounts!!!. people say they have issues with breaking other shit but i never have. |
|
| Author: | Ruthless [ Wed Dec 21, 2011 11:20 pm ] |
| Post subject: | Re: metal transfer bracket on passenger side brisbane |
tanshi wrote: bolt through transfer mounts!!!. people say they have issues with breaking other shit but i never have.
not a good idea ill then tare a massive hole in the transfer i can see this coming from here i would rather replace a few things when i break something easy doing stupid shit rather then a bit more major and then i cant drive home |
|
| Author: | Ruthless [ Tue Jan 03, 2012 9:07 am ] |
| Post subject: | Re: metal transfer bracket on passenger side brisbane |
im still in need of one mine i bracked up but its broken right beside the welds it is starting to get alot more urgent now because the whole transfer twists just driving down the road and the only thing that stops it is the gearstick hitting the tunnel |
|
| Author: | shep [ Tue Jan 03, 2012 10:02 am ] |
| Post subject: | Re: metal transfer bracket on passenger side brisbane |
get some of these and be awesome
http://auszookers.com/index.php?name=Fo ... ic&t=28875 |
|
| Author: | steak_knife [ Tue Jan 03, 2012 10:07 am ] |
| Post subject: | Re: metal transfer bracket on passenger side brisbane |
shep wrote:
But not on the market yet... 
|
|
| Author: | stockman [ Tue Jan 03, 2012 11:40 am ] |
| Post subject: | Re: metal transfer bracket on passenger side brisbane |
I have 2 or 3 sets kicking around if you want to pay postage. |
|
| Author: | Ruthless [ Tue Jan 03, 2012 11:27 pm ] |
| Post subject: | Re: metal transfer bracket on passenger side brisbane |
shep wrote:
thanks shep im defenently gonna get some of them they look really nice |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|