auszookers.com
https://auszookers.com/forum/

Tight SJ410 steering box needed Gold Coast QLD - post ok
https://auszookers.com/forum/viewtopic.php?f=8&t=29057		 Page 1 of 1
Author:  aussiemodder [ Wed Dec 28, 2011 6:06 pm ]
Post subject:  Tight SJ410 steering box needed Gold Coast QLD - post ok
Hi, after a good tight steering box for my '87 SJ410 with disc front end to replace my sloppy one. Im not sure which other models have the same steering box. Gold Coast area but will drive to Bris if no other option, otherwise I'm happy to pay for post. Thanks -Andy
Author:  2stroker [ Wed Dec 28, 2011 8:48 pm ]
Post subject:  Re: Tight SJ410 steering box needed Gold Coast QLD - post ok
Hi Andy, just to narrow your search all Sierra steering boxes are the same, Jimny will also bolt in but has a slightly shorter pitman arm which in theory should mean slightly lighter steering and an extra half turn lock to lock.
Author:  reeceh [ Wed Dec 28, 2011 10:33 pm ]
Post subject:  Re: Tight SJ410 steering box needed Gold Coast QLD - post ok
2stroker is it a true swap from a jimmy? At the wreckers there are quite a few jimmys so I might be in luck!!!!
Author:  aussiemodder [ Thu Dec 29, 2011 7:33 am ]
Post subject:  Re: Tight SJ410 steering box needed Gold Coast QLD - post ok
2stroker wrote:
Hi Andy, just to narrow your search all Sierra steering boxes are the same, Jimny will also bolt in but has a slightly shorter pitman arm which in theory should mean slightly lighter steering and an extra half turn lock to lock.


Thanks for that. most helpful!
Author:  aussiemodder [ Thu Dec 29, 2011 7:52 am ]
Post subject:  Re: Tight SJ410 steering box needed Gold Coast QLD - post ok
I have a lead on one now so I should be sorted. Thanks fellow zookers. -Andy
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/