| auszookers.com https://auszookers.com/forum/ |
|
| Towing A frame for SWB vitara. https://auszookers.com/forum/viewtopic.php?f=8&t=29105 |
Page 1 of 1 |
| Author: | overlander74 [ Fri Dec 30, 2011 5:01 am ] |
| Post subject: | Towing A frame for SWB vitara. |
As the heading sugests i am after an A frame to tow the vitara. Same as they use behind the buses/mobile homes. Will buy complete OR I would make one if i could get a hold of some plans but i am a bit confused as to what they would bolt to as when i looked at a chassis i have here i could only see the two small bolts that hold the bumper on each side and i am not sure they would be enough. the rest of the A frame is easy as i have built many trailers. Cheers Andy |
|
| Author: | christover1 [ Fri Dec 30, 2011 6:14 am ] |
| Post subject: | Re: Towing A frame for SWB vitara. |
http://www.hitchngo.com.au/ http://www.hobohome.com/the_motorhome/t ... -frame.php these poix may help |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|