Not too fussy if stock or modded and havent seen any tintops on gumtree.previous experience tells me tintops are getting pretty rare though
im just hoping for one with the motor upgrade and body in reasonable nick. Been too long since my last beast
| auszookers.com https://auszookers.com/forum/ |
|
| wanted: w/t leafy with g16b, perth wa https://auszookers.com/forum/viewtopic.php?f=8&t=29129 |
Page 1 of 1 |
| Author: | bensooz [ Sat Dec 31, 2011 2:57 am ] |
| Post subject: | wanted: w/t leafy with g16b, perth wa |
Hey guys,after one as described,either basic or modded but really needs to be tintop with g16b/g16a. I can customize suspension and get injection unit installed but be better if all was done. please include price you are chasing |
|
| Author: | MacDaddy [ Sat Dec 31, 2011 7:05 am ] |
| Post subject: | Re: wanted: tintop w/t with g16b,leafy preferred, perth wa |
bensooz wrote: Hey guys,after one as described,either basic or modded but really needs to be tintop with g16b/g16a. I can customize suspension and get injection unit installed but be better if all was done. please include price you are chasing
Good luck... a good stock one are usually snapped up pretty quickly... have you been keepin an eye out on gumtree ? There is a 97 on there now for $5700... and there is a modded one up for swaps/trade for a 250+ dirt bike... and another 89 modded one for $4000... http://wa.gumtree.com.au/f-suzuki-sierr ... 0Australia |
|
| Author: | bensooz [ Sat Dec 31, 2011 8:11 am ] |
| Post subject: | Re: wanted: tintop w/t with g16b,leafy preferred, perth wa |
Not too fussy if stock or modded and havent seen any tintops on gumtree.previous experience tells me tintops are getting pretty rare though im just hoping for one with the motor upgrade and body in reasonable nick. Been too long since my last beast
|
|
| Author: | alien [ Sat Dec 31, 2011 8:14 am ] |
| Post subject: | Re: wanted: tintop w/t with g16b,leafy preferred, perth wa |
buy one on the east coast and freight it over... you'll save a few grand easily. |
|
| Author: | MrRocky [ Sat Dec 31, 2011 8:35 am ] |
| Post subject: | Re: wanted: tintop w/t with g16b,leafy preferred, perth wa |
fly over drive back |
|
| Author: | bensooz [ Sun Jan 01, 2012 4:00 am ] |
| Post subject: | Re: wanted: tintop w/t with g16b,leafy preferred, perth wa |
Good thinking alien,hows your zook doing? i went with you guys out to julimar in the stocker a while ago. east coast sounds like a good idea tbh.love to drive it backtoo 
|
|
| Author: | steak_knife [ Sun Jan 01, 2012 4:17 am ] |
| Post subject: | Re: wanted: tintop w/t with g16b,leafy preferred, perth wa |
http://auszookers.com/index.php?name=Fo ... ic&t=27395 
|
|
| Author: | bensooz [ Sun Jan 01, 2012 5:08 am ] |
| Post subject: | Re: wanted: tintop w/t with g16b,leafy preferred, perth wa |
Aw stekky its beautiful but im hoping for an upgraded engine in one used to have trouble with angles cause of the carb
|
|
| Author: | alien [ Sun Jan 01, 2012 5:17 am ] |
| Post subject: | Re: wanted: tintop w/t with g16b,leafy preferred, perth wa |
that is a good deal though - and che_guitarra just pulled an EFI engine out of a sierra from memory, which only needs a new gasket?? as for my zuk, i busted the rear drive shaft the other week and cos of this time of year won't be getting it back till the end of this week =( |
|
| Author: | Ben_Sierra [ Sun Jan 01, 2012 5:39 am ] |
| Post subject: | Re: wanted: tintop w/t with g16b,leafy preferred, perth wa |
bensooz wrote: Aw stekky its beautiful but im hoping for an upgraded engine in one
used to have trouble with angles cause of the carb I always hear people say this, but I've never had any dramas on angles with my stock carby... |
|
| Author: | alien [ Sun Jan 01, 2012 5:52 am ] |
| Post subject: | Re: wanted: tintop w/t with g16b,leafy preferred, perth wa |
true - i never had issues with the stock carby on angles - but the stock carby was too small for the 1.6, and the weber that replaced it did have issues (but was great on the road). |
|
| Author: | bensooz [ Sun Jan 01, 2012 7:34 am ] |
| Post subject: | Re: wanted: tintop w/t with g16b,leafy preferred, perth wa |
Ah yeah mine was a weber carby too,used to love it for power but angles made it cut out at the worst times. maybe il buy a jimny instead and put a g16 block in |
|
| Author: | MrRocky [ Sun Jan 01, 2012 10:43 am ] |
| Post subject: | Re: wanted: tintop w/t with g16b,leafy preferred, perth wa |
Ben_Sierra wrote: bensooz wrote: Aw stekky its beautiful but im hoping for an upgraded engine in one used to have trouble with angles cause of the carb I always hear people say this, but I've never had any dramas on angles with my stock carby... the stock carb is inadequate on decent angles, thats why the few comp guys that run them spend most of the time with there fingers on the key |
|
| Author: | bensooz [ Mon Jan 02, 2012 6:51 am ] |
| Post subject: | Re: wanted: tintop w/t with g16b,leafy preferred, perth wa |
Actually,il even take a softtop so long as its the g16b in it.make my own top for it
|
|
| Author: | SierraDan [ Mon Jan 02, 2012 6:51 am ] |
| Post subject: | Re: wanted: tintop w/t with g16b,leafy preferred, perth wa |
Ben_Sierra wrote: bensooz wrote: Aw stekky its beautiful but im hoping for an upgraded engine in one used to have trouble with angles cause of the carb I always hear people say this, but I've never had any dramas on angles with my stock carby... Mine runs a little more rough on big angles but otherwise isn't an issue either. |
|
| Author: | bensooz [ Tue Jan 03, 2012 9:41 am ] |
| Post subject: | Re: wanted: w/t leafy with g16b, perth wa |
Wonder if i will have to wait a few months to find one. Alien how did you find yours? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|