auszookers.com
https://auszookers.com/forum/

wanted jimny transfer case
https://auszookers.com/forum/viewtopic.php?f=8&t=29322		 Page 1 of 1
Author:  2.7turbojimny [ Fri Jan 06, 2012 10:48 am ]
Post subject:  wanted jimny transfer case
after a cheap jimny transfer case in working order
Author:  steak_knife [ Fri Jan 06, 2012 7:00 pm ]
Post subject:  Re: wanted jimny transfer case
Electric or manual???
Author:  2.7turbojimny [ Fri Jan 06, 2012 8:30 pm ]
Post subject:  Re: wanted jimny transfer case
manual
Author:  2.7turbojimny [ Fri Jan 06, 2012 8:31 pm ]
Post subject:  Re: wanted jimny transfer case
its for a 2001 model if that makes any differance
Author:  BlueSuzy [ Fri Jan 06, 2012 10:56 pm ]
Post subject:  Re: wanted jimny transfer case
manual
Author:  2.7turbojimny [ Sun Jan 08, 2012 2:14 am ]
Post subject:  Re: wanted jimny transfer case
anybody?
Author:  Bugsta [ Sun Jan 08, 2012 4:00 am ]
Post subject:  Re: wanted jimny transfer case
Are you replacing a working one or a dead one?
Author:  2.7turbojimny [ Sun Jan 08, 2012 7:36 pm ]
Post subject:  Re: wanted jimny transfer case
I need the complete transfer I haven't got one
Author:  2.7turbojimny [ Mon Jan 09, 2012 12:58 am ]
Post subject:  Re: wanted jimny transfer case
What are they worth from the wreckers I dont really Want to spend much I want one to pull apart I was thinking about modding one with a extra gear with a dog engagement setup for crawling so I can have the normal high range then the stock low range aswell as a solenoid operated setup that dogs a gearset into ultra low might even machine a entire transfer case up from billet aluminum Just need one to pull apart to play around with
Author:  2.7turbojimny [ Tue Jan 10, 2012 4:27 am ]
Post subject:  Re: wanted jimny transfer case
?
Author:  2.7turbojimny [ Tue Jan 10, 2012 4:36 am ]
Post subject:  Re: wanted jimny transfer case
will also buy a broken transfer
Author:  2.7turbojimny [ Thu Jan 12, 2012 10:11 am ]
Post subject:  Re: wanted jimny transfer case
anybody need this asap
Author:  monley [ Thu Jan 12, 2012 12:00 pm ]
Post subject:  Re: wanted jimny transfer case
Why not just put a sierra t-case in if your looking for lower gearing? :helloo:
Author:  2.7turbojimny [ Thu Jan 12, 2012 5:35 pm ]
Post subject:  Re: wanted jimny transfer case
i drive the car on the highway every day so i want the stock ratio and a crawling gear i already have a billet of aluminium to make a complete transfer if i cant mod the stock one how i want
Author:  Brenno [ Thu Jan 12, 2012 7:11 pm ]
Post subject:  Re: wanted jimny transfer case
Jonno_racing might sell you his once he arrives back to tassie next month, im sure he will be looking to upgrade, where are you located in tas?
Author:  2.7turbojimny [ Thu Jan 12, 2012 10:07 pm ]
Post subject:  Re: wanted jimny transfer case
Hobart
Author:  monley [ Fri Jan 13, 2012 7:28 am ]
Post subject:  Re: wanted jimny transfer case
What size tyre's do you have on it?
Author:  2.7turbojimny [ Fri Jan 13, 2012 10:58 pm ]
Post subject:  Re: wanted jimny transfer case
31"
Author:  monley [ Fri Jan 13, 2012 11:06 pm ]
Post subject:  Re: wanted jimny transfer case
Just put a sierra t-case in, it will bring your cars raitos back to stock....
Author:  2.7turbojimny [ Sat Jan 14, 2012 4:48 am ]
Post subject:  Re: wanted jimny transfer case
Don't want to stuff around with thd mounts etc
Author:  2.7turbojimny [ Sat Jan 14, 2012 8:57 am ]
Post subject:  Re: wanted jimny transfer case
ok been doing some research and i dont think the chain will be strong enough what sierra box do i need im running 31'' tyres and would like to have it back to stock ratio then make my own 2 speed box and put it between the gearbox and transfer box one gear being strait through and the other extremely low also with a sierra box what will happen with the speedo drive is this any good to me http://www.ebay.com.au/itm/Suzuki-Sierr ... 1c22b9d04f
Author:  monley [ Sun Jan 15, 2012 6:01 am ]
Post subject:  Re: wanted jimny transfer case
2.7turbojimny wrote:
ok been doing some research and i dont think the chain will be strong enough what sierra box do i need im running 31'' tyres and would like to have it back to stock ratio then make my own 2 speed box and put it between the gearbox and transfer box one gear being strait through and the other extremely low also with a sierra box what will happen with the speedo drive is this any good to me http://www.ebay.com.au/itm/Suzuki-Sierr ... 1c22b9d04f


Just buy a the "off road armoury" conversion kit :helloo:

You will need x2 wide track sierra front drive shaft's and a WT jack shaft to...
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/