auszookers.com
https://auszookers.com/forum/

Need a g16b for jimny transplant WA
https://auszookers.com/forum/viewtopic.php?f=8&t=29343		 Page 1 of 1
Author:  PORL [ Sat Jan 07, 2012 5:01 am ]
Post subject:  Need a g16b for jimny transplant WA
Hi all i just drove my Jimny from NSW to WA and it blew its head gasket.
i want a g16b for a replacement as the g13bb hasnt really got a lot of balls.
Im in WA.
would also like a adaptor kit,
Author:  Rusho [ Sat Jan 07, 2012 5:03 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
Don't think anyone has done this conversion have they?? Would be interesting 8)
Author:  PORL [ Sat Jan 07, 2012 5:10 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
its been done a few times. most ppl are very happy with it
Author:  PORL [ Sat Jan 07, 2012 5:11 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
its been done a few times. most ppl are very happy with it
Author:  Rusho [ Sat Jan 07, 2012 5:12 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
Fair enough...never seen one :oops:
Author:  PORL [ Sat Jan 07, 2012 5:15 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
ill post heaps of pics and do a build thread then
Author:  zooky08 [ Sat Jan 07, 2012 6:33 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
Smiffkids Jimny has the g16b engine I'm pretty sure
Author:  monley [ Sat Jan 07, 2012 6:54 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
zooky08 wrote:
Smiffkids Jimny has the g16b engine I'm pretty sure


Yep, so dose another jimny here in WA from suzishop :)
Author:  PORL [ Sat Jan 07, 2012 10:23 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
this isnt getting me a g16b guys lol.
if anyone hears of any in there travels, remember me pleaase
Author:  alien [ Sat Jan 07, 2012 1:16 pm ]
Post subject:  Re: Need a g16b for jimny transplant WA
get a g16b bottom end and bolt it to the jimny head... thats how my sierra is set up and it works a treat =)
Author:  PORL [ Sat Jan 07, 2012 10:22 pm ]
Post subject:  Re: Need a g16b for jimny transplant WA
my head my be rooted. i dont want to pull the g13bb apart to find it broke when i could just trnsplant a full g16b into it
Author:  bakerboy [ Sat Jan 07, 2012 10:31 pm ]
Post subject:  Re: Need a g16b for jimny transplant WA
Have a look through gumtree, the quokka, and the damaged vehicles auctions, bargains are out there
Author:  PORL [ Mon Jan 09, 2012 8:37 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
BUMP!
Author:  PORL [ Mon Jan 09, 2012 8:40 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
BUMP!
Author:  bakerboy [ Mon Jan 09, 2012 10:05 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
bakerboy wrote:
Have a look through gumtree, the quokka, and the damaged vehicles auctions, bargains are out there


bump... :roll:

http://perth.gumtree.com.au/c-Cars-Vehi ... Z342460700
Author:  Fatzook [ Mon Jan 09, 2012 10:27 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
If you can use a Baleno coilpack motor, I have a complete long motor ( head and block, no manifolds ) with 27,000 kms on it. Its from a 2001 Baleno.

$850 firm.
Author:  Ben_Sierra [ Mon Jan 09, 2012 11:04 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
What's the condition of the motor and freight to Perth Mr Fatzook? :helloo:
Author:  Fatzook [ Mon Jan 09, 2012 11:17 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
Ben_Sierra wrote:
What's the condition of the motor and freight to Perth Mr Fatzook? :helloo:


With 27,000 kms on it, its barely run in mate. :wink: I have had the sump off and it is VERY clean in there. Like a brand new motor.

I'll get a freight quote.

Postcode?
Author:  Joe [ Mon Jan 09, 2012 11:18 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
Ben_Sierra wrote:
What's the condition of the motor and freight to Perth Mr Fatzook? :helloo:


That's kind of a grass cut Mr Ben :?
Author:  bakerboy [ Mon Jan 09, 2012 11:26 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
Joe wrote:
Ben_Sierra wrote:
What's the condition of the motor and freight to Perth Mr Fatzook? :helloo:


That's kind of a grass cut Mr Ben :?


You reckon for a big money spinner like himself he'd be able to buy one brand new hey :lol:
Author:  MrRocky [ Mon Jan 09, 2012 11:26 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
:no: u didnt
Author:  Fatzook [ Mon Jan 09, 2012 11:28 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
MrRocky wrote:
:no: u didnt


:lol: :lol:
Author:  Fatzook [ Mon Jan 09, 2012 11:28 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
PORL has first crack at it. But he had better be quick :wink:
Author:  Ben_Sierra [ Mon Jan 09, 2012 11:35 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
I was just asking the question... :roll: If PORL doesn't want it then I may, but I'm sure PORL wants the answers to the same questions!
Author:  PORL [ Tue Jan 10, 2012 1:50 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
I would like the answers please. Lol
And I'm very interested!!!
Yes I can use a type 3 coilpack baleno engine. As long as the g13bb intake and exhaust manifolds bolt on, I think they do and all sensors are the same?
Author:  Fatzook [ Tue Jan 10, 2012 1:54 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
PORL wrote:
I would like the answers please. Lol
And I'm very interested!!!
Yes I can use a type 3 coilpack baleno engine. As long as the g13bb intake and exhaust manifolds bolt on, I think they do and all sensors are the same?


Postcode please.

Manifolds bolt on AFAIK. And from the other thread I assume that the jim sensors run as they do on the jimny motor. You'll just need some G16 injectors.
Author:  PORL [ Tue Jan 10, 2012 1:56 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
My post code is 6168
Author:  PORL [ Tue Jan 10, 2012 1:59 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
Injectors are easy to get.
Author:  Fatzook [ Tue Jan 10, 2012 2:11 am ]
Post subject:  Re: Need a g16b for jimny transplant WA
PM'd.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/