auszookers.com
https://auszookers.com/forum/

falcon wheels to suit trailer.
https://auszookers.com/forum/viewtopic.php?f=8&t=29386
Page 1 of 1

Author:  Pubic [ Sun Jan 08, 2012 8:49 pm ]
Post subject:  falcon wheels to suit trailer.

hi all.

I picked up a boat on the weekend which has 4 stud holden wheels on it.

The hubs and bearings arent in the best condition so instead of just servicing and replaing those i am changing to a falcon setup to suit my car.

I am after preferably some alloys off a BA - BF one tonner, but am open to offers.

2 3 or 4. I am easy.

Preffered in the sydney area, I will travel up to 100km from penrith for the right wheels.

must have around 50% tread. minor gutter rash is accepted.

reply in here or pm me please.

Author:  buzbox [ Mon Jan 09, 2012 12:18 am ]
Post subject:  Re: falcon wheels to suit trailer.

If it's 4 stud, Usually It's Datsun stud pattern with Holden bearings. 114.3 stud pattern?

For a boat trailer you wouldn't want too large of a diameter tyre. My brother swapped 10" boat wheels with 14'' alloys, He drives it semi offroad as in dirt tracks etc and it's good at getting over washouts and potholes, the only thing is now the back wheels of the car are in the water when loading / unloading.

Author:  zukenutter [ Tue Jan 10, 2012 9:46 am ]
Post subject:  Re: falcon wheels to suit trailer.

I had the same problem when I did a spring over on my old tinny trailer.
Live and learn :) was great off road though.

Author:  honks [ Thu Jan 12, 2012 10:18 am ]
Post subject:  Re: falcon wheels to suit trailer.

also keep your eye out for 2wd hilux wheels because they r the same stud pattern i have ford hubs on our camper with hilux steel rims. You might be able to get some in a slightly smaller size than if you get falcon rims.

Author:  Pubic [ Fri Jan 13, 2012 5:44 pm ]
Post subject:  Re: falcon wheels to suit trailer.

cheers boys...

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/