auszookers.com • View topic - WTB - output shaft from 1.3 transfer case

Board index » Shift It And Find It » I Want it I Want it I want it

WTB - output shaft from 1.3 transfer case

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

Brenno

Joined: Thu Apr 22, 2010 11:30 pm
Posts: 996
Location: Hobart

Posted: Mon Jan 16, 2012 12:45 am

Item needed:
Output shaft from 1.3L transfer case.

Problem:
on the front of the output shaft there is a circlip ring - the end of the shaft as copped some abuse and the circlip will no longer hold the gearset on.

Looking for someone that has one laying around, prefer not to buy a full case.

PM on here or sms 0408293381.

Cheers

Brendan

stockman

az supporter

Joined: Thu Nov 05, 2009 10:30 pm
Posts: 5319
Location: Canberra
Vehicle: 4wd

Posted: Mon Jan 16, 2012 9:24 am

I have one here

PM me if you still need one.

_________________
Watch out or you'll get sued.

Brenno

Joined: Thu Apr 22, 2010 11:30 pm
Posts: 996
Location: Hobart

Posted: Mon Jan 16, 2012 8:22 pm

Thanks Stockman - is this the shaft you were thinking?

stockman

az supporter

Joined: Thu Nov 05, 2009 10:30 pm
Posts: 5319
Location: Canberra
Vehicle: 4wd

Posted: Tue Jan 17, 2012 3:48 am

Yes, the stock version of that.

_________________
Watch out or you'll get sued.

Brenno

Joined: Thu Apr 22, 2010 11:30 pm
Posts: 996
Location: Hobart

Posted: Fri Jan 20, 2012 3:35 am

Anyone else with one, unfortunately Stockman only had the front output shaft.

Really dont want to spend another $250 getting one from Lowrange.

Please help!

zuk_244

Joined: Sun Jun 28, 2009 11:30 pm
Posts: 170
Location: Wangaratta, Vic

Posted: Fri Jan 20, 2012 9:42 am

Ive got a stuffed transfer case with chewed out gears. Ill open it up over the weekend and make sure the shaft is good and let you know.

Brenno

Joined: Thu Apr 22, 2010 11:30 pm
Posts: 996
Location: Hobart

Posted: Fri Jan 20, 2012 11:34 am

That would be awesome, appreciate it

zuk_244

Joined: Sun Jun 28, 2009 11:30 pm
Posts: 170
Location: Wangaratta, Vic

Posted: Sun Jan 22, 2012 3:46 am

Got the case apart, ive got the shaft you were after but its worn abit on the low range side of the selector spline.

Send me a pm if you still want it.

Close up of the shaft.

Now ive got the case apart ill throw in any other bits you need to.

Brenno

Joined: Thu Apr 22, 2010 11:30 pm
Posts: 996
Location: Hobart

Posted: Sun Jan 22, 2012 10:42 am

Awesome, check your pm inbox

Page 1 of 1

[ 9 posts ]

Board index » Shift It And Find It » I Want it I Want it I want it

Who is online

Users browsing this forum: No registered users and 26 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum