| auszookers.com https://auszookers.com/forum/ |
|
| datsun 5 speed for ca18 https://auszookers.com/forum/viewtopic.php?f=8&t=30264 |
Page 1 of 1 |
| Author: | cedargrovezook [ Tue Feb 07, 2012 6:53 pm ] |
| Post subject: | datsun 5 speed for ca18 |
im looking for a datsun 5 speed for my brothers sierra im after one of L20 or L18 or Ca20 ive benn told these boxes bolt to the ca bellhousing i have a ca18det 5 speed box if any one interested thanx kris |
|
| Author: | Bennyzarb [ Tue Feb 07, 2012 10:01 pm ] |
| Post subject: | Re: datsun 5 speed for ca18 |
You would be pruty lucky to try find one they are pruty rare and very expensive |
|
| Author: | cedargrovezook [ Tue Feb 07, 2012 11:07 pm ] |
| Post subject: | Re: datsun 5 speed for ca18 |
Bennyzarb wrote: You would be pruty lucky to try find one they are pruty rare and very expensive i know it sucks i used to have a yard full of datsuns |
|
| Author: | Brenno [ Wed Feb 08, 2012 5:45 am ] |
| Post subject: | Re: datsun 5 speed for ca18 |
Why do you want a ca20 box over the ca18 box? They are identical except for internal strength. |
|
| Author: | cedargrovezook [ Wed Feb 08, 2012 10:32 am ] |
| Post subject: | Re: datsun 5 speed for ca18 |
Brenno wrote: Why do you want a ca20 box over the ca18 box? They are identical except for internal strength. i was told the ca20 box is shorter like the l20 box |
|
| Author: | Brenno [ Wed Feb 08, 2012 1:37 pm ] |
| Post subject: | Re: datsun 5 speed for ca18 |
Well the Ca20 box from a pintara is not. Maybe from a series 3 bluebird. I have had both sitting side by side as I was told the same thing. |
|
| Author: | cedargrovezook [ Wed Feb 08, 2012 2:05 pm ] |
| Post subject: | Re: datsun 5 speed for ca18 |
yeah maybe i should just look for older style l20 l18 one |
|
| Author: | Brenno [ Wed Feb 08, 2012 2:46 pm ] |
| Post subject: | Re: datsun 5 speed for ca18 |
Just be wary on strength. The ca20 box has held up so far with ~150kw (at engine) going through it in mine. And I can guarentee that it fits as long as you use the ca18 flywheel and clutch (as the ca20 has a different bolt pattern). Either clutch master/slave can be used. |
|
| Author: | zooktastic [ Wed Feb 08, 2012 4:23 pm ] |
| Post subject: | Re: datsun 5 speed for ca18 |
i got a l20b box under my bench atm and anotehr in a car ill be wrecking soon. postage would be a bitch tho. |
|
| Author: | cedargrovezook [ Thu Feb 09, 2012 3:10 am ] |
| Post subject: | Re: datsun 5 speed for ca18 |
zooktastic wrote: i got a l20b box under my bench atm and anotehr in a car ill be wrecking soon. postage would be a bitch tho. hey zooktastic mate what would you be chasing for that l20b box and is it a 5 speed thanx |
|
| Author: | ca18zook [ Thu Feb 09, 2012 6:15 pm ] |
| Post subject: | Re: datsun 5 speed for ca18 |
Im running a standed ca box in my zook. Had to move the tranfer back but works well. The box your after is the stumpy skyline box and its a 100 mm or so shorter. Trent |
|
| Author: | Brenno [ Thu Feb 09, 2012 7:30 pm ] |
| Post subject: | Re: datsun 5 speed for ca18 |
Dr30 like in l18pwrs build up |
|
| Author: | cedargrovezook [ Thu Feb 09, 2012 9:27 pm ] |
| Post subject: | Re: datsun 5 speed for ca18 |
any of you guys know where i can get a l24 5speed |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|