SierraDan wrote:
Not keen on doing it?
I wouldnt of started this thread if i was would i?
| auszookers.com https://auszookers.com/forum/ |
|
| WTD: Some to fit a air locker (WA) https://auszookers.com/forum/viewtopic.php?f=8&t=30732 |
Page 1 of 1 |
| Author: | monley [ Sat Feb 25, 2012 8:37 pm ] |
| Post subject: | WTD: Some to fit a air locker (WA) |
Willing to pay cash/beer what ever (PM to me discuss this). I'll bring the center to you, or you come to me, what ever is easiest? FYI it's a jimny front diff and the carrier bearings need replacing to. |
|
| Author: | SierraDan [ Sat Feb 25, 2012 9:01 pm ] |
| Post subject: | Re: WTD: Some to fit a air locker (WA) |
Not keen on doing it? |
|
| Author: | monley [ Sat Feb 25, 2012 9:20 pm ] |
| Post subject: | Re: WTD: Some to fit a air locker (WA) |
SierraDan wrote: Not keen on doing it? I wouldnt of started this thread if i was would i?
|
|
| Author: | SierraDan [ Sat Feb 25, 2012 9:24 pm ] |
| Post subject: | Re: WTD: Some to fit a air locker (WA) |
Could have been a case of dont know how to or cant be bothered. Ease up cranky pants! |
|
| Author: | monley [ Sat Feb 25, 2012 9:31 pm ] |
| Post subject: | Re: WTD: Some to fit a air locker (WA) |
SierraDan wrote: Could have been a case of dont know how to or cant be bothered. Ease up cranky pants! If i couldn't be bothered, why would i offer to take the center out? Cranky- yes cus i actually thought some one was saying they could do the job 
|
|
| Author: | SierraDan [ Sat Feb 25, 2012 9:41 pm ] |
| Post subject: | Re: WTD: Some to fit a air locker (WA) |
monley wrote: SierraDan wrote: Could have been a case of dont know how to or cant be bothered. Ease up cranky pants! If i couldn't be bothered, why would i offer to take the center out? Cranky- yes cus i actually thought some one was saying they could do the job Because thats 20mins work. You'll be right. |
|
| Author: | monley [ Sat Feb 25, 2012 9:56 pm ] |
| Post subject: | Re: WTD: Some to fit a air locker (WA) |
Yerr, i'm not going to fuk with a $1200 locker. |
|
| Author: | 31zook [ Sat Feb 25, 2012 10:55 pm ] |
| Post subject: | Re: WTD: Some to fit a air locker (WA) |
I got quoted $160 per diff. I asked about bearing job (I supply the stuff) and he said it's a touch more. But to have it properly installed is well worth the $400. |
|
| Author: | MrRocky [ Sun Feb 26, 2012 9:45 am ] |
| Post subject: | Re: WTD: Some to fit a air locker (WA) |
yeah i'd say round the $400 mark at least so $400 + $1200 = arb's/suzistores price anyway |
|
| Author: | zooky08 [ Sun Feb 26, 2012 7:53 pm ] |
| Post subject: | Re: WTD: Some to fit a air locker (WA) |
Cost me $210 to replace all bearings and fit locker. Anymore then that and your geting riped. Imo |
|
| Author: | MrRocky [ Sun Feb 26, 2012 11:07 pm ] |
| Post subject: | Re: WTD: Some to fit a air locker (WA) |
but u dont live in w.a. |
|
| Author: | alien [ Sun Feb 26, 2012 11:29 pm ] |
| Post subject: | Re: WTD: Some to fit a air locker (WA) |
IMO take it to a diff specialist... its something you really just don't want to fail on you, so why risk a backyard job? |
|
| Author: | zooky08 [ Mon Feb 27, 2012 2:15 am ] |
| Post subject: | Re: WTD: Some to fit a air locker (WA) |
Who ever you take it to make sure they run the tube around the front of the crown wheel or you'll have the same problem I did. |
|
| Author: | monley [ Mon Feb 27, 2012 9:40 pm ] |
| Post subject: | Re: WTD: Some to fit a air locker (WA) |
I will most likely take the center to Opposite Lock and get them to do the carrier bearings at the same time. |
|
| Author: | monley [ Thu Mar 15, 2012 10:57 pm ] |
| Post subject: | Re: WTD: Some to fit a air locker (WA) |
Found someone 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|