| auszookers.com https://auszookers.com/forum/ |
|
| 16 x 7 rims x 4 suit sierra https://auszookers.com/forum/viewtopic.php?f=8&t=30789 |
Page 1 of 1 |
| Author: | birko [ Mon Feb 27, 2012 10:01 pm ] |
| Post subject: | 16 x 7 rims x 4 suit sierra |
Chasing a set of 16x7 rims to suit a sierra located in Perth |
|
| Author: | MrRocky [ Mon Feb 27, 2012 11:00 pm ] |
| Post subject: | Re: 16 x 7 rims x 4 suit sierra |
noooooooooooo |
|
| Author: | Fatzook [ Mon Feb 27, 2012 11:13 pm ] |
| Post subject: | Re: 16 x 7 rims x 4 suit sierra |
Look for rims off a GV 99-05, or XL7 up to 05. Bothe steel and alloy versions fit sierras well. |
|
| Author: | birko [ Tue Feb 28, 2012 9:21 pm ] |
| Post subject: | Re: 16 x 7 rims x 4 suit sierra |
Wouldnt the offset be to positive? |
|
| Author: | atari4x4 [ Tue Feb 28, 2012 9:36 pm ] |
| Post subject: | Re: 16 x 7 rims x 4 suit sierra |
yeah, pretty sure both the GV & XL-7 rims are +5 |
|
| Author: | Fatzook [ Tue Feb 28, 2012 9:57 pm ] |
| Post subject: | Re: 16 x 7 rims x 4 suit sierra |
yeah, but what other options are there? |
|
| Author: | atari4x4 [ Tue Feb 28, 2012 10:00 pm ] |
| Post subject: | Re: 16 x 7 rims x 4 suit sierra |
very few in 16's as far as i know King 16" x 7" -13 Speedy Desert Rat 16" x 7" 0 viewtopic.php?f=5&t=23668&hilit=speedy+offset |
|
| Author: | MrRocky [ Tue Feb 28, 2012 10:17 pm ] |
| Post subject: | Re: 16 x 7 rims x 4 suit sierra |
pro comp's ? |
|
| Author: | birko [ Tue Feb 28, 2012 10:51 pm ] |
| Post subject: | Re: 16 x 7 rims x 4 suit sierra |
king -13 sounds ok. i think procomp have some but price sucks. could Gv steel ones be flipped?? |
|
| Author: | atari4x4 [ Tue Feb 28, 2012 10:58 pm ] |
| Post subject: | Re: 16 x 7 rims x 4 suit sierra |
due to the construction of the GV rim they're unable to be flipped... well that's what i was told by a local wheel mob. |
|
| Author: | Fatzook [ Tue Feb 28, 2012 11:09 pm ] |
| Post subject: | Re: 16 x 7 rims x 4 suit sierra |
atari4x4 wrote: due to the construction of the GV rim they're unable to be flipped... well that's what i was told by a local wheel mob. Correct. The wheel centre is welded in on the bead landing, not the centre ( lower) section of the rim. Because of this, the only possible place it can be welded is right where it is. You COULD flipp is, but you would end up with an offset like -170 
|
|
| Author: | atari4x4 [ Tue Feb 28, 2012 11:17 pm ] |
| Post subject: | Re: 16 x 7 rims x 4 suit sierra |
-170 would earn maximum respect 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|