auszookers.com
https://auszookers.com/forum/

WT Sierra - Engine Mount Part & Expansion Tank
https://auszookers.com/forum/viewtopic.php?f=8&t=30937
Page 1 of 1

Author:  Hybrid [ Mon Mar 05, 2012 12:15 pm ]
Post subject:  WT Sierra - Engine Mount Part & Expansion Tank

Hi Guys,

I need the steel part that bolts between the rubber engine mount and the fixed chassis mount. It's hard to describe but it's basically a piece of pressed metal with two bolt holes on one side to bolt to the chassis and one on the other to bolt to the engine mount with a small hole for a locating dowel. It's shaped like this:

_/'''''''\_

I also need a plastic expansion tank that goes inline between the fuel tank vent and the charcoal canister. It mounts in the back drivers side corner of the cab.

Cheers,

JW

Author:  just_cruizin [ Thu Mar 08, 2012 8:16 pm ]
Post subject:  Re: WT Sierra - Engine Mount Part & Expansion Tank

Got the expansion tank if you still need it

Author:  Hybrid [ Fri Mar 09, 2012 9:23 am ]
Post subject:  Re: WT Sierra - Engine Mount Part & Expansion Tank

Yeah that would be good JC. Send me a cost and your paypal over PM. Express post bag to gold coast if you could. Not heading up to the north side anytime soon.

Cheers,

Author:  just_cruizin [ Fri Mar 09, 2012 10:54 am ]
Post subject:  Re: WT Sierra - Engine Mount Part & Expansion Tank

Pm sent

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/