| auszookers.com https://auszookers.com/forum/ |
|
| wtb: 1.6 baleno ecu https://auszookers.com/forum/viewtopic.php?f=8&t=31403 |
Page 1 of 1 |
| Author: | fatz [ Sat Mar 24, 2012 12:40 pm ] |
| Post subject: | wtb: 1.6 baleno ecu |
hey guys. just wondering if anyone has a 1.6 coilpack baleno ecu for sale. Im getting intermittent issues where my car starts sometimes but not others, and i THINK it may have to do something with the ECU. If anyone has one for sale can you let me know. Thanks Adam |
|
| Author: | bakerboy [ Sat Mar 24, 2012 3:13 pm ] |
| Post subject: | Re: wtb: 1.6 baleno ecu |
Take it to an old school tv repair shop first and they might be able to replace and buggered parts, most ecus that fail on Mitsubishi's can be repaired for a fraction of the cost of a whole replacement ecu, would be worth a shot |
|
| Author: | fatz [ Sun Mar 25, 2012 9:38 pm ] |
| Post subject: | Re: wtb: 1.6 baleno ecu |
thanks mate.. ill keep that in mind, however where i am there are no shops like that.. so a replacement ecu is easier.. and if that isn't the fault at least then i have a spare |
|
| Author: | JrZook [ Mon Mar 26, 2012 10:44 am ] |
| Post subject: | Re: wtb: 1.6 baleno ecu |
I would probably be inclined to try your ECU into a known working Baleno if possible. Will save possible damage to another ECU if you have possible faults in your wiring etc. |
|
| Author: | fatz [ Mon Mar 26, 2012 11:28 am ] |
| Post subject: | Re: wtb: 1.6 baleno ecu |
Thanks jr. I have purchased one from suzistore. I know it's not my wiring. I fried a rail inside my ecu earlier on in the build. I know it's faulty. Just not to what extent. And at least this way if it still is dicky, I will have a CEL / diag to guide me in the right direction |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|