| auszookers.com https://auszookers.com/forum/ |
|
| vit front diff https://auszookers.com/forum/viewtopic.php?f=8&t=31865 |
Page 1 of 1 |
| Author: | Major3 [ Mon Apr 16, 2012 5:02 pm ] |
| Post subject: | vit front diff |
Hi Guys I have a vit 12/97 and have just blown the front diff to hell housing and centre at the same time, does anyone in VIC have a steel front diff and a centre that I can use and any advise for getting and fitting a steel diff |
|
| Author: | christover1 [ Mon Apr 16, 2012 6:11 pm ] |
| Post subject: | Re: vit front diff |
I got my steel front diff by using online parts locators. Cost $460 delivered from Maroochydore Qld to Melb Vic. Non zook wreckers are usually cheaper. Mine came from a 1998 GV manual. |
|
| Author: | Major3 [ Mon Apr 16, 2012 6:16 pm ] |
| Post subject: | Re: vit front diff |
Thanks I'll give that a go |
|
| Author: | christover1 [ Mon Apr 16, 2012 6:21 pm ] |
| Post subject: | Re: vit front diff |
I double checked, mine came out of a 98 GV V6 Manual. Not sure if V6 is important. But a search of steel front diff will find a lot of info on here. |
|
| Author: | Major3 [ Mon Apr 16, 2012 6:28 pm ] |
| Post subject: | Re: vit front diff |
did you only you the housing ? not the v6n center |
|
| Author: | christover1 [ Mon Apr 16, 2012 6:31 pm ] |
| Post subject: | Re: vit front diff |
Major3 wrote: did you only you the housing ? not the v6n center I used axle housing and diff housing, I sold off the GV diff ring n pinion for $150. I fitted my 1.6 centre which is 5:12. The GV has a diff mounted free wheeling set up, and is much better to use a Vitara centre. I think the GV was a 4;3 ring n pinion, so depends on what diff gearing you have. |
|
| Author: | Major3 [ Mon Apr 16, 2012 6:34 pm ] |
| Post subject: | Re: vit front diff |
Thanks again |
|
| Author: | DarkHorse [ Mon Apr 16, 2012 11:31 pm ] |
| Post subject: | Re: vit front diff |
It is the V6 GV you need, and manual apparently. |
|
| Author: | bohuler [ Tue Apr 17, 2012 5:57 pm ] |
| Post subject: | Re: vit front diff |
Yep, its a V6 manual that you need. I went to buy a frucked V6 today just for the front diff but it was an auto so had an alloy front diff. A V6 auto between 03-04 will apparently have the steel front diff, and 05 onwards won't fit. If you find one, can you see if the give a discount for 2 Dave p.s its looking like im going to buy a stat write off car just for the diff, its looking easier then finding one at a wreakers! |
|
| Author: | DarkHorse [ Tue Apr 17, 2012 11:15 pm ] |
| Post subject: | Re: vit front diff |
Tried SuziFour in Sydney? They tend to have at least one kicking around... |
|
| Author: | bailey08 [ Wed Apr 18, 2012 5:47 pm ] |
| Post subject: | Re: vit front diff |
A copy of an e-mail sent to me, i did an online parts finder and got these e-mails within a day. Hi Luke we can supply the housing from a XL7 Vitara for $330.00 plus freight ex Sydney call 0297724444.Regards Junior. ----- Original Message ----- From: To: sales@all4wdspares.com.au Sent: Monday, April 16, 2012 7:28 PM Subject: FINDAPART - Request no. 230260 for Suzuki Grand Vitara You have a parts request from Findapart.com.au Please supply a quote for the following part(s) Your parts request/contact details are as follows: :: General Information :: Urgency: Not Urgent User Type: General Public Category: 4WD (Parts) Sub-Category: Manufacturer: Suzuki Model: Grand Vitara Year: 2002 Engine Capacity: 2500cc Body: VIN: Engine Number: :: Parts Needed :: ->Transmission (Gearbox & Diff): Condition: Used/Reconditioned Description: after a steel diff housing and 3rd member from 98-03 grand vitara. has to be steel, don't need the centre. :: Image Supplied :: :: Contact Information :: Name: Email: FOUND BY: Google Search B/H Phone No: A/H Phone No: Mobile No: 0 Contact By: Email Suburb/City: Brisbane State: queensland Postcode: 4509 Country: Australia ________________________________________ Need to update your profile or change your vehicle selections? Login here Submit your business or website for free to our new FINDAPART Directory Click banner below to buy and sell for free with our new FINDAPART Classifieds This email parts notification was sent from findapart.com.au FINDAPART SERVICES. PO Box 4633, Sylvania Waters NSW 2224 AUSTRALIA. Tel. +61.2.9544 7820 (Internationally) or 02.9544 7820 (within Australia). |
|
| Author: | bailey08 [ Wed Apr 18, 2012 5:52 pm ] |
| Post subject: | Re: vit front diff |
INVOICE ATTACHED. If you have any queries please do not hesitate to contact me on (02)9721 2333. Avo Balk Salesman T: 02 9721 2333 F: 02 9721 2355 E: mailto:avo@newmodelwreckers.com.au W: http://www.newmodelwreckers.com.au --------------------------------------- Visit our new website at http://www.newmodelwreckers.com.au From: Sent: Tuesday, 17 April 2012 6:47 PM To: 'Avo' Subject: RE: FINDAPART - Request no. 230260 for Suzuki Grand Vitara Hi, diff carrier is the 3rd member. I’ve included a pic to clear things up. I need both the diff housing and diff carrier. As the auto and manuals run different ratios I don’t need the centre(mine being auto). I believe the steel housing only came in the manual Grand Vitara and autos after 2003. From: Avo [mailto:avo@newmodelwreckers.com.au] Sent: Tuesday, 17 April 2012 9:25 AM To: Subject: RE: FINDAPART - Request no. 230260 for Suzuki Grand Vitara What do you mean by “”3rd member”” If you have any queries please do not hesitate to contact me on (02)9721 2333. Avo Balk Salesman T: 02 9721 2333 F: 02 9721 2355 E: mailto:avo@newmodelwreckers.com.au W: http://www.newmodelwreckers.com.au --------------------------------------- Visit our new website at http://www.newmodelwreckers.com.au From: Sent: Tuesday, 17 April 2012 8:09 AM To: 'Avo' Subject: RE: FINDAPART - Request no. 230260 for Suzuki Grand Vitara Hi, does this include the 3rd member? Thanks From: Avo [mailto:avo@newmodelwreckers.com.au] Sent: Tuesday, 17 April 2012 8:03 AM To: Subject: RE: FINDAPART - Request no. 230260 for Suzuki Grand Vitara Front diff housing (steel) $330 + $50 delivery If you have any queries please do not hesitate to contact me on (02)9721 2333. Avo Balk Salesman T: 02 9721 2333 F: 02 9721 2355 E: mailto:avo@newmodelwreckers.com.au W: http://www.newmodelwreckers.com.au --------------------------------------- Visit our new website at http://www.newmodelwreckers.com.au From: Sent: Monday, 16 April 2012 7:29 PM To: sales@newmodelwreckers.com.au Subject: FINDAPART - Request no. 230260 for Suzuki Grand Vitara You have a parts request from Findapart.com.au Please supply a quote for the following part(s) Your parts request/contact details are as follows: :: General Information :: Urgency: Not Urgent User Type: General Public Category: 4WD (Parts) Sub-Category: Manufacturer: Suzuki Model: Grand Vitara Year: 2002 Engine Capacity: 2500cc Body: VIN: Engine Number: :: Parts Needed :: ->Transmission (Gearbox & Diff): Condition: Used/Reconditioned Description: after a steel diff housing and 3rd member from 98-03 grand vitara. has to be steel, don't need the centre. :: Image Supplied :: :: Contact Information :: Name: Email: FOUND BY: Google Search B/H Phone No: A/H Phone No: Mobile No: Contact By: Email Suburb/City: Brisbane State: queensland Postcode: 4509 Country: Australia ________________________________________ Need to update your profile or change your vehicle selections? Login here Submit your business or website for free to our new FINDAPART Directory Click banner below to buy and sell for free with our new FINDAPART Classifieds This email parts notification was sent from findapart.com.au FINDAPART SERVICES. PO Box 4633, Sylvania Waters NSW 2224 AUSTRALIA. Tel. +61.2.9544 7820 (Internationally) or 02.9544 7820 (within Australia). |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|