Let me know if your going to Tamworth. I have a tailshaft for Appsie
| auszookers.com https://auszookers.com/forum/ |
|
| [NSW] F10A motor https://auszookers.com/forum/viewtopic.php?f=8&t=31911 |
Page 1 of 1 |
| Author: | zooktastic [ Wed Apr 18, 2012 12:44 pm ] |
| Post subject: | [NSW] F10A motor |
hey guys and girls, looking for a f10a in the west syd area, for the ute project. needs to be running and in reasonable condition. current motor has a smoking habit and knocks haha. dont want to spend alot but let me know if there is anything out there cheers, michael |
|
| Author: | BlueSuzy [ Wed Apr 18, 2012 12:49 pm ] |
| Post subject: | Re: [NSW] F10A motor |
This one looks decent http://www.gumtree.com.au/s-ad/east-sea ... 1001127650 |
|
| Author: | zooktastic [ Wed Apr 18, 2012 4:04 pm ] |
| Post subject: | Re: [NSW] F10A motor |
if its still there 2moro ill be keen 2 grab it me thinks |
|
| Author: | zooktastic [ Fri Apr 20, 2012 8:27 pm ] |
| Post subject: | Re: [NSW] F10A motor |
bump and back to the top of the list! |
|
| Author: | zooktastic [ Tue Apr 24, 2012 3:48 pm ] |
| Post subject: | Re: [NSW] F10A motor |
bump! |
|
| Author: | mr.green [ Tue Apr 24, 2012 9:02 pm ] |
| Post subject: | Re: [NSW] F10A motor |
ive got a f10 maruti motor and gearbox here. removed it for a g16b conversion. put a head gasket in it not long before removing it. ran fine. will swap for a standard set of vit rear springs if you want to make the drive to grab it? |
|
| Author: | zooktastic [ Tue Apr 24, 2012 10:21 pm ] |
| Post subject: | Re: [NSW] F10A motor |
bahahaha funny you request them. i have some here. ill have a look at the drive and see how i go. ill let you know mate. |
|
| Author: | zooktastic [ Fri May 04, 2012 1:18 pm ] |
| Post subject: | Re: [NSW] F10A motor |
bump. anything local before i drive to tamworth out of desperation? |
|
| Author: | BlueSuzy [ Fri May 04, 2012 1:35 pm ] |
| Post subject: | Re: [NSW] F10A motor |
Let me know if your going to Tamworth. I have a tailshaft for Appsie
|
|
| Author: | zooktastic [ Fri May 04, 2012 2:09 pm ] |
| Post subject: | Re: [NSW] F10A motor |
hahaha ok then |
|
| Author: | zooktastic [ Wed May 23, 2012 12:19 pm ] |
| Post subject: | Re: [NSW] F10A motor |
bump. |
|
| Author: | Shansh [ Wed May 23, 2012 9:52 pm ] |
| Post subject: | Re: [NSW] F10A motor |
i saw one on ebay today, have a search it might still be there mate |
|
| Author: | zooktastic [ Wed May 23, 2012 11:29 pm ] |
| Post subject: | Re: [NSW] F10A motor |
yeah thats the rebuilt carry one that has been for sale for ages. im just looking for a cheapie that doesnt burn more oil than petrol to get it thru blue slip and drive around on for a short period of time before 1.6 efi |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|