This is where I should have put this post
viewtopic.php?f=7&t=31958
| auszookers.com https://auszookers.com/forum/ |
|
| Sierra Aircon https://auszookers.com/forum/viewtopic.php?f=8&t=31931 |
Page 1 of 1 |
| Author: | Benchai [ Wed Apr 18, 2012 10:16 pm ] |
| Post subject: | Sierra Aircon |
This is where I should have put this post viewtopic.php?f=7&t=31958
|
|
| Author: | jimbo_jones [ Wed Apr 18, 2012 10:39 pm ] |
| Post subject: | Re: Sierra Aircon |
will fit a 85 n/t? |
|
| Author: | Fatzook [ Wed Apr 18, 2012 11:03 pm ] |
| Post subject: | Re: Sierra Aircon |
jimbo_jones wrote: will fit a 85 n/t? I don't believe so. I have a coily and wt A/C here and they look to be different. ( the under dash unit that is) |
|
| Author: | Benchai [ Thu Apr 19, 2012 6:38 am ] |
| Post subject: | Re: Sierra Aircon |
It was late at night when I posted this. Should be in Getting Rid of Stuff. I was going to use a hotrod, generic under dash thingy when I installed it into KT. As I understand it nothing will just bolt up to the earlier ones like mine so it was going to be a mission whichever way I went. Given how shite the 1l heater units are it would have made an improvement in venting as well as the A/C |
|
| Author: | BlueSuzy [ Thu Apr 19, 2012 10:06 am ] |
| Post subject: | Re: Sierra Aircon |
The old ac units have screw fittings, not o'ring type clamps. It must be a later model thing. Jims are similar. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|