| auszookers.com https://auszookers.com/forum/ |
|
| Jimny 4.3 rear diff centre - Brisbane Northside or SEQ https://auszookers.com/forum/viewtopic.php?f=8&t=32314 |
Page 1 of 1 |
| Author: | zukenutter [ Thu May 03, 2012 4:29 pm ] |
| Post subject: | Jimny 4.3 rear diff centre - Brisbane Northside or SEQ |
Hi guys, as the title says I'm on the hunt for a Jimny 4.3 rear diff centre from any manual VVT Jimny. Preferably with less than 50,000kms Cheers |
|
| Author: | christover1 [ Fri May 04, 2012 9:26 pm ] |
| Post subject: | Re: Jimny 4.3 rear diff centre - Brisbane Northside or SEQ |
I think you can use a 4:3 out of a GV front, or it may just be the ring and pinion? Could narrow down the hunt, but best to get more info from the Jimny guys |
|
| Author: | zukenutter [ Sat May 05, 2012 8:18 am ] |
| Post subject: | Re: Jimny 4.3 rear diff centre - Brisbane Northside or SEQ |
christover1 wrote: I think you can use a 4:3 out of a GV front, or it may just be the ring and pinion? Could narrow down the hunt, but best to get more info from the Jimny guys Cheers, will investigate. |
|
| Author: | joeblow [ Tue May 08, 2012 7:57 pm ] |
| Post subject: | Re: Jimny 4.3 rear diff centre - Brisbane Northside or SEQ |
I think I have a front 4.3. Will check. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|