| auszookers.com https://auszookers.com/forum/ |
|
| 1Lt LWB SJ40T Tailshaft..... https://auszookers.com/forum/viewtopic.php?f=8&t=32611 |
Page 1 of 1 |
| Author: | zookcracker [ Mon May 14, 2012 8:18 pm ] |
| Post subject: | 1Lt LWB SJ40T Tailshaft..... |
Hi ya'll.... Im after a rear tail shaft for my new toy, a 1981 SJ40T. Mine has a big dint in it and vibrates like all shit at about 50km. Im also after an electronic dizzy as well. Ill be up in Brissy next week  , up in Warner so can pick up in North Brisbane.Cheers |
|
| Author: | mrw82 [ Mon May 14, 2012 8:37 pm ] |
| Post subject: | Re: 1Lt LWB SJ40T Tailshaft..... |
Electronic dizzy can be (will need to be) off a 1.3. |
|
| Author: | Fatzook [ Mon May 14, 2012 8:39 pm ] |
| Post subject: | Re: 1Lt LWB SJ40T Tailshaft..... |
mrw82 wrote: Electronic dizzy can be (will need to be) off a 1.3. Or a Maruti. |
|
| Author: | zookcracker [ Mon May 14, 2012 10:20 pm ] |
| Post subject: | Re: 1Lt LWB SJ40T Tailshaft..... |
mrw82 wrote: Electronic dizzy can be (will need to be) off a 1.3. Thats what im after... The points dizzy in it is ok but the advance weights in the thing rattle . I tried tightening the springs, but still rattles. So bugger it , Ill put a electronic in. |
|
| Author: | Boggomobile [ Tue May 15, 2012 8:11 am ] |
| Post subject: | Re: 1Lt LWB SJ40T Tailshaft..... |
Hi All, Zookcracker, think that I can help you with a tailshaft, will check today for you and let you know tonight. Cheers Greg |
|
| Author: | Boggomobile [ Tue May 15, 2012 7:55 pm ] |
| Post subject: | Re: 1Lt LWB SJ40T Tailshaft..... |
Boggomobile wrote: Hi All, Zookcracker, think that I can help you with a tailshaft, will check today for you and let you know tonight. Cheers Greg Checked and found one, Attachment: IMGP5542.JPG slip joint is good and unis are useable! Cheers Greg |
|
| Author: | zookcracker [ Tue May 15, 2012 9:31 pm ] |
| Post subject: | Re: 1Lt LWB SJ40T Tailshaft..... |
Boggomobile wrote: Boggomobile wrote: Hi All, Zookcracker, think that I can help you with a tailshaft, will check today for you and let you know tonight. Cheers Greg Checked and found one, Attachment: IMGP5542.JPG slip joint is good and unis are useable! Cheers Greg PM inbound Boggo...... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|