| auszookers.com https://auszookers.com/forum/ |
|
| WTD: 1.6 TCM PLUG and part of loom. https://auszookers.com/forum/viewtopic.php?f=8&t=32758 |
Page 1 of 1 |
| Author: | tanshi [ Sun May 20, 2012 9:18 pm ] |
| Post subject: | WTD: 1.6 TCM PLUG and part of loom. |
Aparently all vits manual or auto have one. i.e same loom for manuals or autos. happy to pay for shipping. let me know what youve got. |
|
| Author: | Fatzook [ Mon May 21, 2012 10:01 am ] |
| Post subject: | Re: WTD: 1.6 TCM PLUG and part of loom. |
tanshi wrote: Aparently all vits manual or auto have one. i.e same loom for manuals or autos. happy to pay for shipping. let me know what youve got. Every manual loom I have seen was WITHOUT the auto harnesses. Entire sections of loom are missing, and there are only 2 harness plugs, not 3. You need someone who has an auto vit for transplant, but wish to use the sierra 5sp. Then you will get the loom pieces you need. |
|
| Author: | JrZook [ Mon May 21, 2012 1:10 pm ] |
| Post subject: | Re: WTD: 1.6 TCM PLUG and part of loom. |
Mmmmm thought I did read something on one of the threads from Joe Blow talking about similarities between the manual and auto looms/ecu etc... May have read wrong then |
|
| Author: | Fatzook [ Mon May 21, 2012 1:14 pm ] |
| Post subject: | Re: WTD: 1.6 TCM PLUG and part of loom. |
JrZook wrote: Mmmmm thought I did read something on one of the threads from Joe Blow talking about similarities between the manual and auto looms/ecu etc... May have read wrong then I'm only qualified to speak about the looms I've seen. And the manual front cut I had was without the spare loom plugs that the auto requires. 3 out of the last 4 conversions I have done, the auto wiring was stripped and thrown in the bin 
|
|
| Author: | tanshi [ Tue May 22, 2012 11:23 am ] |
| Post subject: | Re: WTD: 1.6 TCM PLUG and part of loom. |
will also except the 26 pin plug from a vitara ecm wiring loom. any one? |
|
| Author: | reallyuted [ Mon May 28, 2012 6:22 pm ] |
| Post subject: | Re: WTD: 1.6 TCM PLUG and part of loom. |
is this the plug? |
|
| Author: | tanshi [ Tue May 29, 2012 8:33 am ] |
| Post subject: | Re: WTD: 1.6 TCM PLUG and part of loom. |
BINGO!!!!!!! how much you want ? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|