| auszookers.com https://auszookers.com/forum/ |
|
| G13a head bolts an washers https://auszookers.com/forum/viewtopic.php?f=8&t=33074 |
Page 1 of 1 |
| Author: | Zuzukie [ Sat Jun 02, 2012 9:37 am ] |
| Post subject: | G13a head bolts an washers |
As the title says I need a set of 10 head bolts and washers to suit g13a Good thread, not bent etc Will pay for postage Dunno how much theyre worth but willing to pay upto 20-25 including post |
|
| Author: | Built4thrashing [ Sat Jun 02, 2012 6:26 pm ] |
| Post subject: | Re: G13a head bolts an washers |
What area you in? I have a box full of assorted bolts so bound to have something....... |
|
| Author: | Zuzukie [ Sat Jun 02, 2012 8:34 pm ] |
| Post subject: | Re: G13a head bolts an washers |
Taree nsw |
|
| Author: | ck13488 [ Fri Jun 08, 2012 1:42 am ] |
| Post subject: | Re: G13a head bolts an washers |
i probably have a spare set from the HT i parted...ill look on saturday for you. im in newy so post should be cheap! |
|
| Author: | buzbox [ Fri Jun 08, 2012 11:49 am ] |
| Post subject: | Re: G13a head bolts an washers |
From what I understand head bolts are a one use only bolt due to them stretching and fatigue. Personally I would never use 2nd head bolts. |
|
| Author: | ck13488 [ Fri Jun 08, 2012 11:55 am ] |
| Post subject: | Re: G13a head bolts an washers |
buzbox wrote: From what I understand head bolts are a one use only bolt due to them stretching and fatigue. Personally I would never use 2nd head bolts. Depends if they are TTY or not. Pretty sure these aren't as i reused them when i did the head on my sierra...the high performance automobile that it was. |
|
| Author: | Scrawny [ Fri Jun 08, 2012 3:40 pm ] |
| Post subject: | Re: G13a head bolts an washers |
buzbox wrote: From what I understand head bolts are a one use only bolt due to them stretching and fatigue. Personally I would never use 2nd head bolts. I tend to just replace them anyway, regardless. New ones are only $30 or so. They don't come with washers tho |
|
| Author: | Zuzukie [ Fri Jun 08, 2012 5:53 pm ] |
| Post subject: | Re: G13a head bolts an washers |
Tried to get new ones but couldnt find a listing They are only torque to specs Not torque to yeild so can be reused Also on that note have found a set so thanks anyway |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|