auszookers.com
https://auszookers.com/forum/

Jimny -gears;rims;shocks;diff;radarms
https://auszookers.com/forum/viewtopic.php?f=8&t=33736		 Page 1 of 1
Author:  Bugsta [ Thu Jun 28, 2012 5:56 pm ]
Post subject:  Jimny -gears;rims;shocks;diff;radarms
After the following...
Looking for...
- trialjimny gears for VVT manual transfer case *Will probably get Protrack*
- 16x7 -12/-13 Jimny ROH/Sunraysia Black rims Just one as a spare
- Jimny ~80mm shocks *Will need to know lengths*
- Jimny 2~3" castor adjusted radius arms
- Vitara 4.3 rear complete diff centre/third member
- ARB locker to suit Vitara 4.3 rear diff

All second hand good condition please
I am located north Brisbane
Author:  atari4x4 [ Thu Jun 28, 2012 6:00 pm ]
Post subject:  Re: Jimny - bumpstops; gears; rims; springs
shoot monley a PM, he'd have the majority of that list.
Author:  jimny_timmy [ Thu Jun 28, 2012 6:21 pm ]
Post subject:  Re: Jimny - bumpstops; gears; rims; springs
Bugsta wrote:
After the following...
- Pair of Jimny rear bumpstops
- trialjimny gears for VVT manual transfer case
- 16x7 -12/-13 Jimny ROH/Sunraysia Black rims
- Jimny ~80mm coil springs and perhaps shocks

All second hand good condition please
I am located north Brisbane

good luck with finding secondhand trial gears... I'd just fork out the $1200ish and get them new :)
Author:  Bugsta [ Thu Jun 28, 2012 6:32 pm ]
Post subject:  Re: Jimny - bumpstops; gears; rims; springs
I would love to, and if I can save that I will. It will then be a guarantee of condition.
Author:  Bugsta [ Mon Jul 16, 2012 10:21 pm ]
Post subject:  Re: Jimny - bumpstops; gears; rims; springs
Bump. Any new bits available?
Author:  jonno_racing [ Tue Jul 17, 2012 12:07 am ]
Post subject:  Re: Jimny - bumpstops; gears; rims; springs
let me know if your interested in selling your old springs?
Author:  Bugsta [ Tue Jul 17, 2012 4:51 pm ]
Post subject:  Re: Jimny - bumpstops; gears; rims; springs
Yeah I will be. They have sagged quite a lot, but I dare say most of the drop is due to the cage, rear bumper and tow bar, ARB bar and winch. I'd reckon they will still sit higher than standard with no extras. I'd actually like to try them on a stock Jim nearby once I have them off. This will be easier than pulling my accessories off.

I'll post up when I'm at that stage.
Author:  jonno_racing [ Mon Jul 23, 2012 9:27 pm ]
Post subject:  Re: Jimny - bumpstops; gears; rims; springs
yeah mate just inbox me when you know
Author:  rummy1 [ Sun Jul 29, 2012 6:16 pm ]
Post subject:  Re: Jimny - bumpstops; gears; rims; springs
Hey mate. I've got the rear b/stops if you still need 'em
Author:  Bugsta [ Tue Oct 16, 2012 9:10 pm ]
Post subject:  Re: Jimny - bumpstops; gears; rims; springs
BUMP

Sory rummy1, by the toime I got around to sorting it out, you're gone... so I could be talking tomyself :/

More wanted items added in original post
Author:  Bugsta [ Sun Oct 28, 2012 9:13 am ]
Post subject:  Re: Jimny - bumpstops; gears; rims; springs
Bumpy rides
Author:  Bugsta [ Tue Dec 11, 2012 10:47 am ]
Post subject:  Re: Jimny - bumpstops; gears; rims; springs
Bump Bump Bump

... Need some drive flanges
Author:  Bugsta [ Sat Sep 07, 2013 5:03 pm ]
Post subject:  Re: Jimny - drive flanges; gears; rims; springs
beepbeep
Author:  jimny_timmy [ Sat Oct 05, 2013 4:39 pm ]
Post subject:  Re: Jimny -gears;rims;shocks;diff;radarms
What % reduction gears do you want?
Author:  Bugsta [ Sat Oct 05, 2013 5:57 pm ]
Post subject:  Re: Jimny -gears;rims;shocks;diff;radarms
Hi/Lo - 24% or less
Lo - As much as I can.

I'm waiting on Protrack in Greece to finish their kits though. Should be good value.
Author:  jimny_timmy [ Sun Oct 06, 2013 10:57 am ]
Post subject:  Re: Jimny -gears;rims;shocks;diff;radarms
I should have some 20% tj gears within the next two weeks
Author:  Bugsta [ Mon Oct 07, 2013 6:37 pm ]
Post subject:  Re: Jimny -gears;rims;shocks;diff;radarms
To keep for yourelf, or looking to sell?

How much use hve they had and $$?
Author:  jimny_timmy [ Mon Oct 07, 2013 7:12 pm ]
Post subject:  Re: Jimny -gears;rims;shocks;diff;radarms
You have a pm
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/