I know where there is a wrecked Jimny being auctioned today
. You could get them off that.- Tim.
| auszookers.com https://auszookers.com/forum/ |
|
| Jim/vit rear coil towers and coils https://auszookers.com/forum/viewtopic.php?f=8&t=33910 |
Page 1 of 1 |
| Author: | monley [ Thu Jul 05, 2012 11:01 pm ] |
| Post subject: | Jim/vit rear coil towers and coils |
Just chasing one pair of vit/jim rear coil towers now. Also chasing STANDARD height jimny front coils. If your in WA i will come with my own tools and cut off the coil towers... |
|
| Author: | #ROSH# [ Fri Jul 06, 2012 10:15 am ] |
| Post subject: | Re: Jim/vit rear coil towers |
I could help you with vit 2" lift springs but a long way to post ......... |
|
| Author: | monley [ Tue Jul 10, 2012 10:55 pm ] |
| Post subject: | Re: Jim/vit rear coil towers |
#ROSH# wrote: I could help you with vit 2" lift springs but a long way to post ......... Hey mate, Thanks for the offer, but im really chasing standard height springs. Cheers anyway. |
|
| Author: | tim80z [ Wed Jul 11, 2012 8:07 am ] |
| Post subject: | Re: Jim/vit rear coil towers |
I know where there is a wrecked Jimny being auctioned today . You could get them off that.- Tim. |
|
| Author: | monley [ Fri Jul 13, 2012 9:14 pm ] |
| Post subject: | Re: Jim/vit rear coil towers |
Bump. Also chasing Jim/vit ps setup. |
|
| Author: | monley [ Wed Jul 18, 2012 10:51 pm ] |
| Post subject: | Re: Jim/vit rear coil towers |
BUMP!  
|
|
| Author: | atari4x4 [ Wed Jul 18, 2012 10:53 pm ] |
| Post subject: | Re: Jim/vit rear coil towers |
shoot shane1992 a pm he was wrecking a vit on the east coast & i'm pretty sure he was cutting bodywork sections out for someone so cutting the chassis mounts off shouldn't be a problem viewtopic.php?f=7&t=33656 edit i lie... looks like it didn't end up getting parted  
|
|
| Author: | monley [ Wed Jul 18, 2012 11:08 pm ] |
| Post subject: | Re: Jim/vit rear coil towers |
atari4x4 wrote: shoot shane1992 a pm he was wrecking a vit on the east coast & i'm pretty sure he was cutting bodywork sections out for someone so cutting the chassis mounts off shouldn't be a problem viewtopic.php?f=7&t=33656 edit i lie... looks like it didn't end up getting parted You had me excited for a second there  Might just have to fab up some 
|
|
| Author: | atari4x4 [ Wed Jul 18, 2012 11:14 pm ] |
| Post subject: | Re: Jim/vit rear coil towers |
sorry bloke, i remember reading about wanting the rear 1/4 panel off it & got all exited for you. 
|
|
| Author: | monley [ Wed Jul 18, 2012 11:27 pm ] |
| Post subject: | Re: Jim/vit rear coil towers |
 Thanks anyway. Might give suzistore a call and see if they have any chassis going to scrap soon and see if i can go up there with a grinder and hack some of with a grinder
|
|
| Author: | shandy92 [ Sat Jul 21, 2012 9:27 pm ] |
| Post subject: | Re: Jim/vit rear coil towers |
mate didnt realise you wanted std height springs, i have some but i was hoping to keep them incase i ever needed to return it to stock. are they temp or are they going to be used permanently? if temp, there all urs. ask alex4wd, if he has his old std springs. only around the corner from you. |
|
| Author: | monley [ Wed Jul 25, 2012 8:42 pm ] |
| Post subject: | Re: Jim/vit rear coil towers and coils |
TTT 
|
|
| Author: | shandy92 [ Wed Jul 25, 2012 9:39 pm ] |
| Post subject: | Re: Jim/vit rear coil towers and coils |
monley wrote: TTT ???? what that |
|
| Author: | monley [ Wed Jul 25, 2012 9:48 pm ] |
| Post subject: | Re: Jim/vit rear coil towers and coils |
To the top... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|