auszookers.com
https://auszookers.com/forum/

LJ50 parts - Getting Really, Really, Really Desperate
https://auszookers.com/forum/viewtopic.php?f=8&t=34725		 Page 1 of 1
Author:  tonyevans [ Sat Aug 04, 2012 4:27 pm ]
Post subject:  LJ50 parts - Getting Really, Really, Really Desperate
All leads so far have fallen though so I am still looking for 1 Lj50 Bonnet.

I an getting desperate as these are the last major parts I need to restore my LJ50 and LJ50V back to original.

I have a windscreen frame to swap if anyone needs one and can come up with anything I need or even a contact to get a grill and/or bonnet
Author:  Highway-Star [ Sat Aug 04, 2012 5:00 pm ]
Post subject:  Re: LJ50 parts - Getting Desperate
tonyevans wrote:
All leads so far have fallen though so I am still looking for 2 LJ50 grills and 1 Lj50 Bonnet.

I an getting desperate as these are the last major parts I need to restore my LJ50 and LJ50V back to original.

I have a windscreen frame to swap if anyone needs one and can come up with anything I need or even a contact to get a grill and/or bonnet



Hi Tony

I probably have an LJ50 grill that would be a good candidate for a plastic welding repair (I have a Stockman grill that was plastic welded, and it came up great [don't know who did it though, i got it like that]). Not sure what sort of access you would have to a plastic welder down your way though....?

Can't help with a bonnet.... I would like someone I know to do some fibreglass 50 bonnets.... currently they aren't interested though :(
Author:  Verm1n [ Sat Aug 04, 2012 7:43 pm ]
Post subject:  Re: LJ50 parts - Getting Desperate
Highway-Star wrote:
tonyevans wrote:
All leads so far have fallen though so I am still looking for 2 LJ50 grills and 1 Lj50 Bonnet.

I an getting desperate as these are the last major parts I need to restore my LJ50 and LJ50V back to original.

I have a windscreen frame to swap if anyone needs one and can come up with anything I need or even a contact to get a grill and/or bonnet



Hi Tony

I probably have an LJ50 grill that would be a good candidate for a plastic welding repair (I have a Stockman grill that was plastic welded, and it came up great [don't know who did it though, i got it like that]). Not sure what sort of access you would have to a plastic welder down your way though....?

Can't help with a bonnet.... I would like someone I know to do some fibreglass 50 bonnets.... currently they aren't interested though :(


dibs on the stockman grill... bahaha
would that person be me for the fiberglassing??
Author:  tonyevans [ Sun Aug 05, 2012 8:15 am ]
Post subject:  Re: LJ50 parts - Getting Desperate
Highway star - I would be interested in the LJ50 grill - PM me details - I would need it posted to Walgett 2832 though.

Tony
Author:  shep [ Sun Aug 05, 2012 8:55 am ]
Post subject:  Re: LJ50 parts - Getting Desperate
I am trying to buy a 50 of a fella that also has a crap load of parts, including 10 NIB grills. It will take me anouther month or two to convince him to sell it to me but.
Author:  tonyevans [ Sun Aug 05, 2012 9:18 am ]
Post subject:  Re: LJ50 parts - Getting Desperate
shep wrote:
I am trying to buy a 50 of a fella that also has a crap load of parts, including 10 NIB grills. It will take me anouther month or two to convince him to sell it to me but.

I have been trying for a while now so I think I will still be interested by then - Bags first dibs :peaceout:
Author:  Highway-Star [ Sun Aug 05, 2012 12:57 pm ]
Post subject:  Re: LJ50 parts - Getting Desperate
Verm1n wrote:
dibs on the stockman grill... bahaha
would that person be me for the fiberglassing??


Not for sale.... its my only useable spare :)
You and another person.... I would be happy with anyone doing it :P


tonyevans wrote:
Highway star - I would be interested in the LJ50 grill - PM me details - I would need it posted to Walgett 2832 though.

Tony



I'll PM you this evening Tony. Will take some photos first, as its not the sort of thing I would sell sight unseen (as it does need that repairing).
Author:  tonyevans [ Sun Aug 05, 2012 1:06 pm ]
Post subject:  Re: LJ50 parts - Getting Desperate
Thanks mate - I have been reading up on Plastic welding - Might get a gun - I need a new toy and there are always plastic things to fix :<}
Author:  sideways [ Sun Aug 05, 2012 7:13 pm ]
Post subject:  Re: LJ50 parts - Getting Desperate
I think someone needs to do a run of fibreglass LJ50 bonnets.... My LJ50 has a mangled bonnet too. :(

shep wrote:
I am trying to buy a 50 of a fella that also has a crap load of parts, including 10 NIB grills. It will take me anouther month or two to convince him to sell it to me but.


Oooooooooo!!!!! :D :D
Author:  Skippy [ Sun Aug 05, 2012 8:35 pm ]
Post subject:  Re: LJ50 parts - Getting Desperate
I have done one before for a friends 50 in 2 pieces, top piece and then the inside and stuck them together. I'd need a decent condition bonnet to use as a plug.
Author:  2stroker [ Sun Aug 05, 2012 9:58 pm ]
Post subject:  Re: LJ50 parts - Getting Desperate
Skippy, I have a very good clean straight rust free LJ50 bonnet I would be willing to make it vailable to you to take a mould from, in return I would like a fibreglass bonnet from the mould (for cost of material) when my steel bonnet is returned..

Tony I have a couple of very good 50 grilles (and a couple of 80 grilles), I don't particularly want to part with them but pm me with an offer and I may part with a 50 grille purely because I feel your frustration.
Author:  Skippy [ Mon Aug 06, 2012 1:48 am ]
Post subject:  Re: LJ50 parts - Getting Desperate
2 stroker, you have a pm.

I'll ring around today for some prices on gear and go from there.
Author:  tonyevans [ Tue Aug 07, 2012 9:12 am ]
Post subject:  Re: LJ50 parts - Getting Desperate
Thanks to the kind heartedness of a couple of the great Auzookers Crew I will soon have the grills I need. Thanks Guys

Now all I need is a BONNET - I don't mind if it has some rust or minor damage - Tony
Author:  tonyevans [ Sat Aug 11, 2012 9:07 am ]
Post subject:  Re: LJ50 parts - Getting Desperate
I still need this Bonnet
Author:  BLZUK [ Tue Aug 14, 2012 8:20 am ]
Post subject:  Re: LJ50 parts - Getting Desperate
Tony, a mate just wrecked his LJ50, I got him to keep a couple of bits including a bonnet. Think it is a bit beat up but probably fixable. I will get my hands on it in a couple of weeks and get some pics, freight might be the killer here tho...
Author:  tonyevans [ Tue Aug 14, 2012 2:19 pm ]
Post subject:  Re: LJ50 parts - Getting Desperate
BLZUK wrote:
Tony, a mate just wrecked his LJ50, I got him to keep a couple of bits including a bonnet. Think it is a bit beat up but probably fixable. I will get my hands on it in a couple of weeks and get some pics, freight might be the killer here tho...

Like it says I'm Getting Desperate :?
Author:  tonyevans [ Mon Aug 20, 2012 1:22 pm ]
Post subject:  Re: LJ50 parts - Getting Really, Really, Really Desperate
Bump - Bump
Author:  tonyevans [ Fri Aug 31, 2012 12:25 pm ]
Post subject:  Re: LJ50 parts - Getting Really, Really, Really Desperate
Ouch - a big bump
Author:  rustyzook [ Fri Aug 31, 2012 1:33 pm ]
Post subject:  Re: LJ50 parts - Getting Really, Really, Really Desperate
hi tony, there was a bloke in tamworth selling a complete lj 50, i cant rember his username no idea if it sold it had a good bonnet.
Author:  tonyevans [ Fri Aug 31, 2012 1:47 pm ]
Post subject:  Re: LJ50 parts - Getting Really, Really, Really Desperate
rustyzook wrote:
hi tony, there was a bloke in tamworth selling a complete lj 50, i cant rember his username no idea if it sold it had a good bonnet.

Would be nice if I knew who????????
Author:  rustyzook [ Fri Aug 31, 2012 9:34 pm ]
Post subject:  Re: LJ50 parts - Getting Really, Really, Really Desperate
sorry i was in a rush before,

i found his thread

viewtopic.php?f=7&t=32675
Author:  rick1970 [ Fri Aug 31, 2012 10:42 pm ]
Post subject:  Re: LJ50 parts - Getting Really, Really, Really Desperate
Its gone, sorry.
Author:  rustyzook [ Sat Sep 01, 2012 12:04 am ]
Post subject:  Re: LJ50 parts - Getting Really, Really, Really Desperate
prob already know about them.

http://www.ebay.com.au/itm/suzuki-4x4-L ... 3f1b7afb4d

http://www.gumtree.com.au/s-ad/goulburn ... 1006269021
Author:  tonyevans [ Sat Sep 08, 2012 3:23 pm ]
Post subject:  Re: LJ50 parts - Getting Really, Really, Really Desperate
Still Desperately seeking a Bonnet
Author:  TZAR [ Wed Sep 19, 2012 3:28 am ]
Post subject:  Re: LJ50 parts - Getting Really, Really, Really Desperate
http://www.gumtree.com.au/s-ad/onkapari ... 1006292793
Author:  tonyevans [ Wed Sep 19, 2012 12:40 pm ]
Post subject:  Re: LJ50 parts - Getting Really, Really, Really Desperate
Thanks for the heads up Tzar - I have emailed him.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/