sounds like my cup holders
| auszookers.com https://auszookers.com/forum/ |
|
| 98-03 grand vitara steel 3rd member https://auszookers.com/forum/viewtopic.php?f=8&t=35503 |
Page 1 of 1 |
| Author: | willo [ Tue Sep 04, 2012 10:16 pm ] |
| Post subject: | 98-03 grand vitara steel 3rd member |
Hi all I know this is a LOOOOONG shot but I am after a steel 3rd member from a 98-03 grand vitara to put on a Anvil diff housing . Cheers Willo |
|
| Author: | Built4thrashing [ Wed Sep 05, 2012 5:30 pm ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
A sierra 3rd can be made to fit. |
|
| Author: | willo [ Wed Sep 05, 2012 5:33 pm ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
Built4thrashing wrote: A sierra 3rd can be made to fit. ??? Pleeeeaze Expplaain |
|
| Author: | christover1 [ Wed Sep 05, 2012 7:08 pm ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
Sierra 3rd bolts in and lines up properly. But the oil reserve on the bottom fouls on the Vits front cross member. Some creative manufacturing is needed, depending on your set up Right cv won't go thru the Sierras carrier, so vits carrier is needed. But you would just use the Sierra steel 3rd, with Vits internal bits. I was going to put one in my vit, but was unable to do the work needed. Research it more, as my memory could be faded |
|
| Author: | willo [ Thu Sep 06, 2012 4:41 pm ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
cool thanks I will look into it |
|
| Author: | thesupervisor [ Sat Sep 08, 2012 1:02 am ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
I have one $1000 posted in aus |
|
| Author: | atari4x4 [ Sat Sep 08, 2012 1:25 am ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
sounds like my cup holders
|
|
| Author: | thesupervisor [ Sat Sep 08, 2012 10:45 am ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
Well I had to pay 800 to suzistore for one that needed full rebuild and no brackets so I think its a bargin |
|
| Author: | atari4x4 [ Sat Sep 08, 2012 10:50 am ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
damn, i've been selling them WAY to cheap then. 
|
|
| Author: | Joe [ Sat Sep 08, 2012 11:15 am ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
They fetch crazy prices over here for some reason 
|
|
| Author: | willo [ Sun Sep 09, 2012 12:21 am ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
Crazy is not the word I would use
|
|
| Author: | Built4thrashing [ Sun Sep 09, 2012 11:49 am ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
Can buy complete wrecks for $2k so $1000 for a steel diff is a bit exy. Be cheaper to buy a steel anvil diff housing. |
|
| Author: | Fatzook [ Sun Sep 09, 2012 11:59 am ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
Built4thrashing wrote: Can buy complete wrecks for $2k so $1000 for a steel diff is a bit exy. Be cheaper to buy a steel anvil diff housing. True, but you'll still need a steel 3rd. |
|
| Author: | Joe [ Sun Sep 09, 2012 12:02 pm ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
Willo already has an anvil he just needs the 3rd member |
|
| Author: | thesupervisor [ Mon Sep 10, 2012 12:22 am ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
well it will be cheaper if you come pick it up tom price is not that far haha pity i dont work at parabadoo anymore |
|
| Author: | willo [ Tue Sep 11, 2012 9:21 pm ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
I will say no thanks I am following a long Suzuki tradition and being a tight ass (there needs to be a smiles that laughs like Sheldon Cooper) huhu hu |
|
| Author: | willo [ Wed Sep 12, 2012 2:04 pm ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
Well looks like I got one $500 Delivered from Queensland |
|
| Author: | Joe [ Wed Sep 12, 2012 2:23 pm ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
Nice that's what i payed for the one in the white vit, did ya get it off someone on here or a wreckers? |
|
| Author: | willo [ Wed Sep 12, 2012 3:36 pm ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
A wrecker $400 +$100 delivery |
|
| Author: | Built4thrashing [ Wed Sep 12, 2012 5:31 pm ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
willo wrote: A wrecker $400 +$100 delivery Where from? |
|
| Author: | Vits93 [ Wed Sep 12, 2012 5:42 pm ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
have you tried http://www.suzukiwreckers.com.au/ got mine for $200 + postage |
|
| Author: | atari4x4 [ Wed Sep 12, 2012 5:43 pm ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
Vits93 wrote: have you tried http://www.suzukiwreckers.com.au/ got mine for $200 + postage bargain 
|
|
| Author: | Vits93 [ Wed Sep 12, 2012 6:16 pm ] |
| Post subject: | Re: 98-03 grand vitara steel 3rd member |
atari4x4 wrote: I would recommend these guys to anyone, got a mate at work who's doing a gti conversion on his clubman and they were more than happy to help out with info and worked out what he needed, also think he got a pretty good price too. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|