| auszookers.com https://auszookers.com/forum/ |
|
| wanting to swap spoa w/t diff housings for spua w/t diff hou https://auszookers.com/forum/viewtopic.php?f=8&t=35881 |
Page 1 of 1 |
| Author: | jimbo_jones [ Thu Sep 20, 2012 8:48 pm ] |
| Post subject: | wanting to swap spoa w/t diff housings for spua w/t diff hou |
Im looking to swap my w/t diff housings there spoa in narrow track spacing Im after a set of spua w/t diff housings on narrow track spacing Im in wollongong housing will come with the high steer set up |
|
| Author: | zooktastic [ Fri Sep 21, 2012 7:44 am ] |
| Post subject: | Re: wanting to swap spoa w/t diff housings for spua w/t diff |
I have spua on wt spacing. Going low again? |
|
| Author: | jimbo_jones [ Sat Sep 22, 2012 6:39 pm ] |
| Post subject: | Re: wanting to swap spoa w/t diff housings for spua w/t diff |
zooktastic wrote: I have spua on wt spacing. Going low again? yep wana swap |
|
| Author: | zooktastic [ Sat Sep 22, 2012 10:02 pm ] |
| Post subject: | Re: wanting to swap spoa w/t diff housings for spua w/t diff |
Yeah i can strip my arb goodies out. Pm me. Housings would be fantastic for the lwb ute |
|
| Author: | SierraDan [ Sat Sep 22, 2012 10:34 pm ] |
| Post subject: | Re: wanting to swap spoa w/t diff housings for spua w/t diff |
|
|
|
| Author: | stockman [ Sat Sep 22, 2012 10:37 pm ] |
| Post subject: | Re: wanting to swap spoa w/t diff housings for spua w/t diff |
Too tippy? |
|
| Author: | jimbo_jones [ Sat Sep 22, 2012 10:55 pm ] |
| Post subject: | Re: wanting to swap spoa w/t diff housings for spua w/t diff |
Na the miss won't get in it she says it's to hard to climb into |
|
| Author: | SierraDan [ Sat Sep 22, 2012 11:37 pm ] |
| Post subject: | Re: wanting to swap spoa w/t diff housings for spua w/t diff |
But your display pic is your car on its side haha. |
|
| Author: | zooktastic [ Sun Sep 23, 2012 12:35 am ] |
| Post subject: | Re: wanting to swap spoa w/t diff housings for spua w/t diff |
Do you want some unmolested housings or what. Wondering if i should strip the good bits out of my housing or not |
|
| Author: | jimbo_jones [ Sun Sep 23, 2012 8:08 am ] |
| Post subject: | Re: wanting to swap spoa w/t diff housings for spua w/t diff |
Im after a set of w/t on narrow track spacing there's no point in swaping for the std w/t ones as I will still have to change the spring pearch's to n/t anyway I can just spua the diffs I have, if I have to |
|
| Author: | zooktastic [ Sun Sep 23, 2012 2:54 pm ] |
| Post subject: | Re: wanting to swap spoa w/t diff housings for spua w/t diff |
Fair enough. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|