auszookers.com
https://auszookers.com/forum/

wtb. vic. sj40 disk brake front end parts
https://auszookers.com/forum/viewtopic.php?f=8&t=36191
Page 1 of 1

Author:  blackxt [ Sun Oct 07, 2012 6:02 pm ]
Post subject:  wtb. vic. sj40 disk brake front end parts

hey guys im chasing disk brake parts to convert my drum front end sj40 to a disk brake front
im told all i need is the whole stub axle assembly from eny sierra

thanks

Author:  Gwagensteve [ Sun Oct 07, 2012 6:39 pm ]
Post subject:  Re: wtb. vic. sj40 disk brake front end parts

Does your current front end have free wheeling hubs?

Steve.

Author:  blackxt [ Sun Oct 07, 2012 6:48 pm ]
Post subject:  Re: wtb. vic. sj40 disk brake front end parts

yes it has free wheel hubs

Author:  dougies_tx5turbo [ Sun Oct 07, 2012 7:01 pm ]
Post subject:  Re: wtb. vic. sj40 disk brake front end parts

Image
I have got this don't know what it is called but its from a wt diff, I'm in Brisbane postcode 4500 if your interested make me an offer.

Author:  dougies_tx5turbo [ Sun Oct 07, 2012 7:07 pm ]
Post subject:  Re: wtb. vic. sj40 disk brake front end parts

I've got the backing plates as well to go with the top ones and callipers, callipers may need a rebuild, I can supply roaters but i will be looking for a little bit for them as they are new but have surface rust that will clean up

Author:  dougies_tx5turbo [ Sun Oct 07, 2012 8:12 pm ]
Post subject:  Re: wtb. vic. sj40 disk brake front end parts

Pm received, pm sent.

Author:  Gwagensteve [ Sun Oct 07, 2012 9:21 pm ]
Post subject:  Re: wtb. vic. sj40 disk brake front end parts

blackxt wrote:
yes it has free wheel hubs


:(

That's not what I wanted to hear.

I was chasing the drive flanges that 1.0 drum bake cars had stock. Could have had a pair of free wheeling hubs for them.

Steve.

Author:  stockman [ Sun Oct 07, 2012 9:33 pm ]
Post subject:  Re: wtb. vic. sj40 disk brake front end parts

Gwagensteve wrote:
blackxt wrote:
yes it has free wheel hubs


:(

That's not what I wanted to hear.

I was chasing the drive flanges that 1.0 drum bake cars had stock. Could have had a pair of free wheeling hubs for them.

Steve.


I have a set of 1L diffs here. Have not paid enough attention to them. If they have free wheeling hubs they no good to you?

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/