| auszookers.com https://auszookers.com/forum/ |
|
| 1993 1.6 EFI Vitara distributor https://auszookers.com/forum/viewtopic.php?f=8&t=37234 |
Page 1 of 1 |
| Author: | kenny.G345 [ Mon Nov 19, 2012 9:37 pm ] |
| Post subject: | 1993 1.6 EFI Vitara distributor |
hey all i am after a 1993 1.6 Vitara EFI distributor, willing to pay postage to hobart |
|
| Author: | shep [ Mon Nov 19, 2012 10:19 pm ] |
| Post subject: | Re: 1.6 Vitara cabry distributor |
I am 99% certain that a g13 dizzy will do the job |
|
| Author: | kenny.G345 [ Tue Nov 20, 2012 3:44 pm ] |
| Post subject: | Re: 1.6 Vitara cabry distributor |
nope they are different |
|
| Author: | jono165 [ Tue Nov 20, 2012 8:44 pm ] |
| Post subject: | Re: 1.6 Vitara cabry distributor |
shep wrote: I am 99% certain that a g13 dizzy will do the job I am 99.99% sure they are the same provided they are both a right angle drive. The head (g13ba vs G16a) is the same casting except for port/valve sizing, the sierra dizzy housing will bolt to a vitara head also the camshaft is the same other than lift/duration but the drive to the dizzy is the same. You might just need to change a plug to suit the loom. |
|
| Author: | kenny.G345 [ Tue Nov 20, 2012 9:52 pm ] |
| Post subject: | Re: 1.6 Vitara cabry distributor |
im using not using it on a carby motor though, I am using it on a G16b |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|