I smoked my lettuce
| auszookers.com https://auszookers.com/forum/ |
|
| wt transfer flanges https://auszookers.com/forum/viewtopic.php?f=8&t=37451 |
Page 1 of 1 |
| Author: | pezz [ Thu Nov 29, 2012 11:01 am ] |
| Post subject: | wt transfer flanges |
Im after a set of three wt sierra flanges for the transfer case Cheers |
|
| Author: | SierraDan [ Thu Nov 29, 2012 4:26 pm ] |
| Post subject: | Re: wt transfer flanges |
I may have a few for you. not sure which ones they are but i have a couple im pretty sure |
|
| Author: | pezz [ Thu Nov 29, 2012 5:39 pm ] |
| Post subject: | Re: wt transfer flanges |
Lettuce know when youve dug them out |
|
| Author: | SierraDan [ Thu Nov 29, 2012 5:41 pm ] |
| Post subject: | Re: wt transfer flanges |
I have Green Oak Lettuce |
|
| Author: | atari4x4 [ Thu Nov 29, 2012 5:47 pm ] |
| Post subject: | Re: wt transfer flanges |
I smoked my lettuce
|
|
| Author: | mnemonix [ Thu Nov 29, 2012 5:50 pm ] |
| Post subject: | Re: wt transfer flanges |
If you have spares Dan, I'm after a rear output flange and rear diff flange, both WT? |
|
| Author: | pezz [ Thu Nov 29, 2012 5:53 pm ] |
| Post subject: | Re: wt transfer flanges |
Possillyabley my favourate mis use of a turd.... no, word |
|
| Author: | SierraDan [ Thu Nov 29, 2012 6:06 pm ] |
| Post subject: | Re: wt transfer flanges |
Have a front output that i cant get off the shaft. and a rear output. no diff ones sorry |
|
| Author: | pezz [ Thu Nov 29, 2012 6:12 pm ] |
| Post subject: | Re: wt transfer flanges |
what you want for the rear? have you tried a puller on the front? |
|
| Author: | SierraDan [ Thu Nov 29, 2012 6:34 pm ] |
| Post subject: | Re: wt transfer flanges |
Nothing. Come get it. Tried rattle gun and leverage on the nut. Shes on well. |
|
| Author: | pezz [ Thu Nov 29, 2012 6:37 pm ] |
| Post subject: | Re: wt transfer flanges |
cool.. might swing by in the lwb as it will be rego'd very shortly 
|
|
| Author: | SierraDan [ Thu Nov 29, 2012 6:46 pm ] |
| Post subject: | Re: wt transfer flanges |
sweeeet. you have my number. let me know. Mark. I miiiight have those flanges we couldnt get on the NT pinion. Ill look tomorrow for you |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|