auszookers.com
https://auszookers.com/forum/

1inch jimny lift
https://auszookers.com/forum/viewtopic.php?f=8&t=37551
Page 1 of 1

Author:  PORL [ Tue Dec 04, 2012 5:49 pm ]
Post subject:  1inch jimny lift

Can anyone help me find a 1 inch body lift for my jimny?
Cheers

Author:  joel [ Tue Dec 04, 2012 7:27 pm ]
Post subject:  Re: 1inch jimny lift

ive only seen 2''
why do you want/think you need a body lift??

Author:  jimmy91 [ Tue Dec 04, 2012 7:50 pm ]
Post subject:  Re: 1inch jimny lift

Buy some 50mm bar and cut it 25mm long, drill holes and it's done

Author:  shep [ Tue Dec 04, 2012 8:02 pm ]
Post subject:  Re: 1inch jimny lift

I bought a one inch lwb sierra body lift of just cruising, see if he will make one for a jimny

Author:  Bruce [ Tue Dec 04, 2012 8:07 pm ]
Post subject:  Re: 1inch jimny lift

shep wrote:
I bought a one inch lwb sierra body lift of just cruising, see if he will make one for a jimny



X2

Author:  PORL [ Wed Dec 05, 2012 10:20 am ]
Post subject:  Re: 1inch jimny lift

I want a 1 inch lift for guard clearance.
Also I'm using a g16b in my jimny, what I didn't see at the time is that the jimny sump drops down further back than the g16b sump so the diff kisses the sump on big front on drops a inch lift will help that.
I will eventually change sumps but I will also have to change oil pick ups as well and that's a bit of fucking around that I don't want to do.
It's already got a 2 inch suspension lift,
I don't want to go too high as I still want it to fit in my garage haha and 1inch will be plenty for what I want.

Author:  dougies_tx5turbo [ Wed Dec 05, 2012 10:37 am ]
Post subject:  Re: 1inch jimny lift

A 1inch body lift won't help your sump and diff as a body lift lifts the body up not the chassis. Your maybe better off getting spring spacers or bump stop extensions.

Author:  PORL [ Wed Dec 05, 2012 11:10 am ]
Post subject:  Re: 1inch jimny lift

I was looking at some bump stop extensions, considering it. The diff is only just kissing the sump so it's a good option

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/