Me and my dad are chasing a double belted pully, the type that is used when adding aircon or power steering. It's to go on a standard 1.3L sierra engine
Pm me or Benchia if you can help out, thanks in advance
| auszookers.com https://auszookers.com/forum/ |
|
| Engine Pully https://auszookers.com/forum/viewtopic.php?f=8&t=38689 |
Page 1 of 1 |
| Author: | SierraFreek [ Thu Jan 31, 2013 5:22 pm ] |
| Post subject: | Engine Pully |
Me and my dad are chasing a double belted pully, the type that is used when adding aircon or power steering. It's to go on a standard 1.3L sierra engine Pm me or Benchia if you can help out, thanks in advance
|
|
| Author: | lbzook [ Thu Jan 31, 2013 5:35 pm ] |
| Post subject: | Re: Engine Pully |
Grab one off a G13BA swift or barina, bout $20 from any wreckers |
|
| Author: | shep [ Thu Jan 31, 2013 5:38 pm ] |
| Post subject: | Re: Engine Pully |
Is it a 4 or 5 bolt jobbie? |
|
| Author: | Benchai [ Thu Jan 31, 2013 7:56 pm ] |
| Post subject: | Re: Engine Pully |
shep wrote: Is it a 4 or 5 bolt jobbie? Are you still after canvas seat covers? Seems I always forget about stuff you ask me about, sorry mate. If you have a quick look at Jake's build thread his seats are what I have for a template, they're the ones with the see through headrests. Normally they're around $100 a seat, but I'd do a pair a fair bit better for you - just need to know if the seats I have are like yours and what colour you want. Postage I'd reckon less than $20 |
|
| Author: | Benchai [ Mon Feb 04, 2013 6:37 am ] |
| Post subject: | Re: Engine Pully |
shep wrote: Is it a 4 or 5 bolt jobbie? It's 4 bolt |
|
| Author: | jonfromhamilton [ Mon Feb 04, 2013 7:35 pm ] |
| Post subject: | Re: Engine Pully |
I found one out of a Barina that had 3 grooves for the water pump/alternator pulley and 4 for the powersteer/air con so becareful as I nearly totally overlooked it when I went to the wrecker last time. |
|
| Author: | shep [ Mon Feb 04, 2013 7:47 pm ] |
| Post subject: | Re: Engine Pully |
Pretty sure I have a double V belt pulley, will have a look tomorrow to see if it is a 4 or 5 bolt jobbie. I reckon it will be a 4 bolt as it is on a 1324cc G13 |
|
| Author: | Benchai [ Mon Feb 04, 2013 9:11 pm ] |
| Post subject: | Re: Engine Pully |
shep wrote: Pretty sure I have a double V belt pulley, will have a look tomorrow to see if it is a 4 or 5 bolt jobbie. I reckon it will be a 4 bolt as it is on a 1324cc G13 Thanks Buddy |
|
| Author: | shep [ Wed Feb 06, 2013 7:33 am ] |
| Post subject: | Re: Engine Pully |
It is a 4 bolt. If it is the one ya want, give me a good price on a pair of seat covers and we can do a deal   
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|