Yes, it is.
| auszookers.com https://auszookers.com/forum/ |
|
| Holden drover 1.3L Transfer case https://auszookers.com/forum/viewtopic.php?f=8&t=39301 |
Page 1 of 1 |
| Author: | droverdave [ Thu Feb 28, 2013 11:44 am ] |
| Post subject: | Holden drover 1.3L Transfer case |
hello, Location: Brisbane CBD 50km radius, prefereably southside looking for a transfer case to suit my holden drover 1.3L Persumably any 1.3L transfer case (that has the same size flanges as mine, and has a drum handbrake on the tailshaft) from a suzuki seirra will fit? Gotta be in working order with no bearing noise (like mine has) This is so i can keep the car on the road while i rebuild mine. |
|
| Author: | sideways [ Thu Feb 28, 2013 12:53 pm ] |
| Post subject: | Re: Holden drover 1.3L Transfer case |
A NT Sierra case will bolt in. Youl just have to swap the fanges and handbrake with a WT one. |
|
| Author: | droverdave [ Thu Feb 28, 2013 1:01 pm ] |
| Post subject: | Re: Holden drover 1.3L Transfer case |
I was under the impression my little drover was a narrow track? either way, come at my with your transfer cases! |
|
| Author: | sideways [ Thu Feb 28, 2013 2:10 pm ] |
| Post subject: | Re: Holden drover 1.3L Transfer case |
Yes, it is.
|
|
| Author: | droverdave [ Thu Feb 28, 2013 2:37 pm ] |
| Post subject: | Re: Holden drover 1.3L Transfer case |
ahh i just re-read your above post, yep makes sense. cheers! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|