auszookers.com
https://auszookers.com/forum/

WANTED NT SIERRA DIFF CENTRE
https://auszookers.com/forum/viewtopic.php?f=8&t=40154
Page 1 of 1

Author:  kalby [ Tue Apr 09, 2013 10:46 am ]
Post subject:  WANTED NT SIERRA DIFF CENTRE

Hey all I'm looking for a nt sierra diff centre pretty sure they are 4.11 I want to try fit them in my carry van since it has like 5.9 .
I'm from Adelaide prefer pick up from there.
Please let me know what you have or know of


Thanks kalby

Author:  rockcrawlerdude [ Tue Apr 09, 2013 12:18 pm ]
Post subject:  Re: WANTED NT SIERRA DIFF CENTRE

THe NT ratio is 3.9, but there was a bunch of maratu's that came out in 4.11, there is some forsale in the getting rid of it thread.

Author:  want33s [ Wed Apr 10, 2013 9:07 am ]
Post subject:  Re: WANTED NT SIERRA DIFF CENTRE

Don't carrys use 1.0 centres? Not 1.3...

Author:  tanshi [ Wed Apr 10, 2013 9:24 am ]
Post subject:  Re: WANTED NT SIERRA DIFF CENTRE

your after a 1 litre 4.1 diff. but depending on the carry it may or may not fit.
a 1 litre diff will fit in a super carry, with the 5.1 ratio. other wise they are heaps smaller

Author:  kalby [ Wed Apr 10, 2013 12:23 pm ]
Post subject:  Re: WANTED NT SIERRA DIFF CENTRE

Yea mines just a high top carry van I got a of off Google images and the centre looked identical to mine.
I'm not exactly sure if it is or not that's why was hoping to find one in Adelaide to confirm before purchase.
My ratio is horrible like 5.1 its 80kms 3000rpm haha
So if someone please has one let me know thanks

Author:  jdk81 [ Thu Apr 11, 2013 6:07 am ]
Post subject:  Re: WANTED NT SIERRA DIFF CENTRE

Hang on sec.
Are you making any other changes to tyre size, engine or gearbox?

Has it been changed by someone else?
If yes, please advise.
If no, it is stock and you just want to change the diff gears.

Put up with the engine singing, it was designed to sing like that.
It will be horrible to drive when you gear it poorly.
Your 1st gear will feel like your current 2nd gear, and your high gear will become only useable downhill, or maybe on flat sections with a tailwind, if you are lucky.

Author:  kalby [ Thu Apr 11, 2013 7:05 am ]
Post subject:  Re: WANTED NT SIERRA DIFF CENTRE

Dude I asked for a diff centre not advice like that.
Its a 13bt rotary... I didn't bother writing because I only wanted to find a centre with different ratios.

Author:  tanshi [ Thu Apr 11, 2013 7:50 am ]
Post subject:  Re: WANTED NT SIERRA DIFF CENTRE

its simple, if you have a super carry they are 1 litre sized and the diff centres will bolt in.

if its just a normal carry they are small and you will not find anything to fit.

if it is a super carry i know some one who will buy your 5.1 diffs

Author:  kalby [ Thu Apr 11, 2013 8:31 am ]
Post subject:  Re: WANTED NT SIERRA DIFF CENTRE

Ah yea wicked its a holden scurry which I'm pretty sure is super carry.
So now I just have to find a 1.0 diff

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/