| auszookers.com https://auszookers.com/forum/ |
|
| Brisbane small welding service https://auszookers.com/forum/viewtopic.php?f=8&t=40264 |
Page 1 of 1 |
| Author: | reeceh [ Sun Apr 14, 2013 1:16 pm ] |
| Post subject: | Brisbane small welding service |
I need someone in Brisbane that will do 2 small welds for me. When I was re installing my read tintop door the top 2 captive nuts have been sheared off. I have decided to weld the hinge to the body. So door hinge to body metal. Name your price. I can grind away all the paint for prep. Just need a few small welds! |
|
| Author: | Joe [ Sun Apr 14, 2013 2:29 pm ] |
| Post subject: | Re: Brisbane small welding service |
Fatzook? |
|
| Author: | Scrawny [ Sun Apr 14, 2013 2:33 pm ] |
| Post subject: | Re: Brisbane small welding service |
Ken is on the Northside and I'm sure he'd be happy to do that Send him a pm memberlist.php?mode=viewprofile&u=4973 |
|
| Author: | reeceh [ Sun Apr 14, 2013 2:37 pm ] |
| Post subject: | Re: Brisbane small welding service |
Fatzook looks like a very busy man. Ill hit ken up I think. |
|
| Author: | Fatzook [ Sun Apr 14, 2013 5:42 pm ] |
| Post subject: | Re: Brisbane small welding service |
I could do it on Wednesday. TIG or MIG? |
|
| Author: | KEENSY85 [ Sun Apr 14, 2013 6:17 pm ] |
| Post subject: | Re: Brisbane small welding service |
Looks like fatz is onto it, if he gets tied up or what not give me call reech |
|
| Author: | want33s [ Mon Apr 15, 2013 9:07 am ] |
| Post subject: | Re: Brisbane small welding service |
Welding the hinge to the body will just end up cracking and tearing a BIG hole in your panel. You are much better off trying to get a plate with two holes tapped in it, into the C pillar. |
|
| Author: | Fatzook [ Mon Apr 15, 2013 9:32 am ] |
| Post subject: | Re: Brisbane small welding service |
want33s wrote: Welding the hinge to the body will just end up cracking and tearing a BIG hole in your panel. You are much better off trying to get a plate with two holes tapped in it, into the C pillar. That was my plan depending on how bad the existing damage is. |
|
| Author: | KEENSY85 [ Mon Apr 15, 2013 11:24 am ] |
| Post subject: | Re: Brisbane small welding service |
Or nutserts at least |
|
| Author: | Fatzook [ Mon Apr 15, 2013 12:37 pm ] |
| Post subject: | Re: Brisbane small welding service |
KEENSY85 wrote: Or nutserts at least If the original metal is fatugued, nutserts will be a poor choice. |
|
| Author: | reeceh [ Mon Apr 15, 2013 6:49 pm ] |
| Post subject: | Re: Brisbane small welding service |
This week I'm held up at work each arvo. I've done a temp fix on it with a chunky tec screw! It's doing well lol. When I can see myself being free ill let both you guys know and arrange a time with one of you. This weekend and the next I'm doing some cashies. So that's out of the option. Even if I was to bring it around and show you first and get your opinion then we know what we are up against! |
|
| Author: | Fatzook [ Mon Apr 15, 2013 7:08 pm ] |
| Post subject: | Re: Brisbane small welding service |
reeceh wrote: This week I'm held up at work each arvo. I've done a temp fix on it with a chunky tec screw! It's doing well lol. When I can see myself being free ill let both you guys know and arrange a time with one of you. This weekend and the next I'm doing some cashies. So that's out of the option. Even if I was to bring it around and show you first and get your opinion then we know what we are up against! I'll be in the workshop all week, so feel free to drop in. 
|
|
| Author: | reeceh [ Mon Apr 15, 2013 7:29 pm ] |
| Post subject: | Re: Brisbane small welding service |
Wicked! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|