| auszookers.com https://auszookers.com/forum/ |
|
| Sierra SJ80 CV's and Combination switch https://auszookers.com/forum/viewtopic.php?f=8&t=41526 |
Page 1 of 1 |
| Author: | Jorynator [ Fri Jun 21, 2013 9:12 pm ] |
| Post subject: | Sierra SJ80 CV's and Combination switch |
Hello i am looking for both front CV's that will suit my SJ80, seem to be really hard to find unless i go genuine, does anyone know of anywhere in the Brisbane area that can get CV's that will work? or is anyone wanting to sell them? mainly after the left. also i am looking for a combination switch that has inter mitten wipers, what one works on the sj80 other then genuine? or other Suzuki or anything that plugs straight in, or if anyone has a second hand one in good condition and wants to sell it? any help would be great cheers Rob |
|
| Author: | coily96 [ Mon Jun 24, 2013 8:37 pm ] |
| Post subject: | Re: Sierra SJ80 CV's and Combination switch |
Try narangba wreckers, boss wrecking or one stop suzi shop |
|
| Author: | Rusho [ Mon Jun 24, 2013 9:07 pm ] |
| Post subject: | Re: Sierra SJ80 CV's and Combination switch |
Combo switches and just about everything else SJ80 are unique to itself. Not very many parts are interchangeable. I think I may have Cv's, not 100% sure though. Will let you know |
|
| Author: | atari4x4 [ Mon Jun 24, 2013 9:15 pm ] |
| Post subject: | Re: Sierra SJ80 CV's and Combination switch |
bit of coily combo switch tech here: viewtopic.php?f=8&t=32137&p=634518&hilit=coily+combo+switch#p634518 |
|
| Author: | Jorynator [ Mon Jun 24, 2013 10:47 pm ] |
| Post subject: | Re: Sierra SJ80 CV's and Combination switch |
cheers guys i ended up getting one from a pre 04 jimny as they are the same thankfully. and i found a combination switch in New Zealand for about $100 and $40 shipping so will have to do for now. apparently the Suzuki alto fit as well as the swift for the combo switch so will look into it next time. its a shame its so hard to get parts for them. |
|
| Author: | tuffcoily [ Wed Jun 26, 2013 7:42 pm ] |
| Post subject: | Re: Sierra SJ80 CV's and Combination switch |
You can use Jimny axles and cv's you just need to trim about 10mm of the diff centre end of the axle |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|