| auszookers.com https://auszookers.com/forum/ |
|
| Machinist Required https://auszookers.com/forum/viewtopic.php?f=8&t=42580 |
Page 1 of 1 |
| Author: | bigrig91 [ Wed Aug 21, 2013 5:33 pm ] |
| Post subject: | Machinist Required |
Hey guys, I need to put an internal thread about 25mm deep into a 100mm long piece of about 51mm internal diameter pipe or tube. Does anyone have the ability or know someone that has the ability to do this? Thanks, If you need you can call me on 0413244035 (Brad). Initially i need to do 2 pieces but hopefully i will need to do 25 or so. |
|
| Author: | shep [ Wed Aug 21, 2013 7:04 pm ] |
| Post subject: | Re: Machinist Required |
Ball has a CNC lathe, pm him |
|
| Author: | want33s [ Thu Aug 22, 2013 5:43 am ] |
| Post subject: | Re: Machinist Required |
Send a PM to Offroad Solutions. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|