| auszookers.com https://auszookers.com/forum/ |
|
| Baleno, vitara jimny o2 plug https://auszookers.com/forum/viewtopic.php?f=8&t=43269 |
Page 1 of 1 |
| Author: | cal213 [ Thu Oct 03, 2013 8:42 pm ] |
| Post subject: | Baleno, vitara jimny o2 plug |
Chasing the engine side loom plug for the o2 sensor, 4 wire. Certain the baleno and vitara of certain years is the same as the g13bb engine jimny Or if someone knows of a patch lead i can purchase. |
|
| Author: | stockman [ Sat Oct 05, 2013 9:17 pm ] |
| Post subject: | Re: Baleno, vitara jimny o2 plug |
Are you chasing just the plug? Assuming the wires are still there and quality 4 pin plug (obviously male and female required) will do the job. From what I have seen the 4 pin plugs (not so common) use the heated o2 sensor and the 3 pin (more common) use the not heated. I read on here that all Aus delivered Suzuki's never had the heated o2 sensor but that's not true as mine has. |
|
| Author: | cal213 [ Thu Oct 10, 2013 11:23 am ] |
| Post subject: | Re: Baleno, vitara jimny o2 plug |
Hey bit of a late reply on my behalf, yea mine is the four wire heated type, chasing the male end, so i can make a patch lead. I have two o2 sensors ready |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|