| auszookers.com https://auszookers.com/forum/ |
|
| Qld. Mk2 or 3 swift gti dizzy https://auszookers.com/forum/viewtopic.php?f=8&t=43520 |
Page 1 of 1 |
| Author: | Junior_91 [ Mon Oct 21, 2013 8:07 pm ] |
| Post subject: | Qld. Mk2 or 3 swift gti dizzy |
Hey guys I'm chasing a mk 2 or 3 dizzy for a swift gti head. Ipswich Brisbane area. Changing from mk1 angle adapter for aftermarket management. Pm or reply here. Cheers chris |
|
| Author: | jonno_racing [ Mon Oct 21, 2013 9:32 pm ] |
| Post subject: | Re: Qld. Mk2 or 3 swift gti dizzy |
i have built a few angle drives but dont have the pieces around to build anymore. if u get the bits i will build you one mate. |
|
| Author: | masterA [ Tue Oct 22, 2013 10:35 am ] |
| Post subject: | Re: Qld. Mk2 or 3 swift gti dizzy |
You built a angle drive kit for a MK2/MK3 dizzy? |
|
| Author: | Junior_91 [ Tue Oct 22, 2013 1:53 pm ] |
| Post subject: | Re: Qld. Mk2 or 3 swift gti dizzy |
No it's mk1 now I'm changing to mk2 or 3 and want to get rid of the angle drive. Sorry. |
|
| Author: | JrZook [ Tue Oct 22, 2013 2:35 pm ] |
| Post subject: | Re: Qld. Mk2 or 3 swift gti dizzy |
What aftermarket management? Will it be compatible with the odd trigger wheel spacings of the mk2/3's? |
|
| Author: | jonno_racing [ Tue Oct 22, 2013 2:40 pm ] |
| Post subject: | Re: Qld. Mk2 or 3 swift gti dizzy |
sorry i didn't read it right! Jr is on to it tho, you might be better off with a g16b dizzy (this is the exact reason a g16b dizzy wont work with a mk2/3 gti and angle drive) |
|
| Author: | JrZook [ Tue Oct 22, 2013 4:28 pm ] |
| Post subject: | Re: Qld. Mk2 or 3 swift gti dizzy |
Could just stick to the Mk1 and gut the dizzy so it just acts as the cam sensor. Very similar setup as the early VR type G16B dizzy. |
|
| Author: | jonno_racing [ Tue Oct 22, 2013 4:29 pm ] |
| Post subject: | Re: Qld. Mk2 or 3 swift gti dizzy |
at a guess id say it would be running a sierra dizzy... |
|
| Author: | Junior_91 [ Wed Oct 23, 2013 9:12 am ] |
| Post subject: | Re: Qld. Mk2 or 3 swift gti dizzy |
I'll probably end up with a haltech sprint 500. So would I just be able to run my current one as a sensor for the computer or will I need to change it? |
|
| Author: | Junior_91 [ Wed Oct 23, 2013 9:13 am ] |
| Post subject: | Re: Qld. Mk2 or 3 swift gti dizzy |
So a g16b dizzy will go straight in? |
|
| Author: | JrZook [ Wed Oct 23, 2013 9:24 am ] |
| Post subject: | Re: Qld. Mk2 or 3 swift gti dizzy |
Junior_91 wrote: I'll probably end up with a haltech sprint 500. So would I just be able to run my current one as a sensor for the computer or will I need to change it? Yes as long as the ECU accepts variable reluctance sensor input. All you have to do with your dizzy is lock out all advance mechanisms and unsolder/remove the ignition coil driver inside of it. |
|
| Author: | Junior_91 [ Wed Oct 23, 2013 7:30 pm ] |
| Post subject: | Re: Qld. Mk2 or 3 swift gti dizzy |
Righto thanks. I'll look into it further. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|