| Author |
Message |
kenny.G345
Joined: Mon Nov 21, 2011 9:27 am Posts: 68 Location: Hobart, Tasmania
Vehicle: SWB sj70
|
 Posted: Tue Mar 04, 2014 9:10 pm |
|
|
Hey I am chasing a set of front 1.6 EFI LWB vitara caliper mounts, I live in Hobart and I am willing to pay postage
|
|
|
|
 |
Gwagensteve
Joined: Thu Feb 26, 2009 10:30 pm Posts: 13007 Location: Melbourne
|
 Posted: Wed Mar 05, 2014 8:06 am |
|
|
Sure you didn't mean this to be in the wanted section? Can this be moved to wanted or tech?
Aren't vitara caliper mounts cast as part of the upright?
If you want to mount vented callipers on a sierra, they bolt on. Mounts are the same.
Steve.
|
|
|
|
 |
kenny.G345
Joined: Mon Nov 21, 2011 9:27 am Posts: 68 Location: Hobart, Tasmania
Vehicle: SWB sj70
|
 Posted: Wed Mar 05, 2014 9:09 pm |
|
|
sorry though I did post it in Wanted and know caliper mount that I know of is part of the upright, the caliper is bolted on slides to the mount then the mount is bolted to the hub
|
|
|
|
 |
DarkHorse

az supporter
Joined: Wed Apr 14, 2010 11:30 pm Posts: 5413
Vehicle: 08 SV650
|
 Posted: Mon Mar 10, 2014 11:10 pm |
|
Err... Caliper:  Knuckles/Uprights whatever you want to call them:  Which bit do you need?
|
|
|
|
 |
Blkfxx

az supporter
Joined: Sat Feb 04, 2012 7:11 pm Posts: 1105 Location: Oberon, NSW
Vehicle: Drover pickup turk
|
 Posted: Tue Mar 11, 2014 9:25 am |
|
Would be this bit? 
_________________ Quote: I like the tuna here
|
|
|
|
 |
jono165

az supporter
Joined: Thu May 27, 2010 12:01 pm Posts: 834 Location: Melbourne
|
 Posted: Wed Mar 12, 2014 1:59 pm |
|
|
I have a set of these from a broken set of calipers. Pm me if you are still chasing them.
|
|
|
|
 |
kenny.G345
Joined: Mon Nov 21, 2011 9:27 am Posts: 68 Location: Hobart, Tasmania
Vehicle: SWB sj70
|
 Posted: Sun Mar 16, 2014 7:29 pm |
|
|
Finally someone knows what I am talking about
|
|
|
|
 |
kenny.G345
Joined: Mon Nov 21, 2011 9:27 am Posts: 68 Location: Hobart, Tasmania
Vehicle: SWB sj70
|
 Posted: Tue Mar 18, 2014 9:45 pm |
|
|
|
 |
|