Hi as it says I need 4 GV rear light light bulb bayonet fittings - I have the reversing light ones. This is the lights -
And the fitting -
Will need them posted.
| auszookers.com https://auszookers.com/forum/ |
|
| GV Rear light bayonet fittings https://auszookers.com/forum/viewtopic.php?f=8&t=45785 |
Page 1 of 1 |
| Author: | tonyevans [ Tue Apr 08, 2014 11:24 am ] |
| Post subject: | GV Rear light bayonet fittings |
Hi as it says I need 4 GV rear light light bulb bayonet fittings - I have the reversing light ones. This is the lights - And the fitting - Will need them posted. |
|
| Author: | bohuler [ Tue Apr 08, 2014 11:48 am ] |
| Post subject: | Re: GV Rear light bayonet fittings |
The globe is a T-20 wedge. eBay search on T20 sockets brings up: http://www.ebay.com.au/itm/7440-T20-Wed ... b23&_uhb=1 http://www.ebay.com.au/itm/T20-Gray-Pla ... 7b&_uhb=1= Something like that will get you out of trouble. The T-10 are the smaller ones so don't buy them  Also check that you are getting the correct one. There is 2 types of these wedge globes. One is a single 12v 21W globe like a stop or indicator the other is a stop/tail twin element jobbie. If you have to replace the socket then just get the standard bayonet globe as they are alot cheaper to buy and more readily available. Dave |
|
| Author: | tonyevans [ Tue Apr 08, 2014 11:55 am ] |
| Post subject: | Re: GV Rear light bayonet fittings |
Thanks for that - I did not know what these were called - I guess it is a sign of having got OLD 
|
|
| Author: | bohuler [ Tue Apr 08, 2014 1:18 pm ] |
| Post subject: | Re: GV Rear light bayonet fittings |
Nope I only know what they are called cause I sell the globes As I said, I would really recommend changing to standard bayonet globe fittings to make future servicing more economical. Dave |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|