didn't the later ones also run an ecu controlled alternator?
| auszookers.com https://auszookers.com/forum/ |
|
| wtb: H27 engine, gearbox and every thing else https://auszookers.com/forum/viewtopic.php?f=8&t=48529 |
Page 1 of 1 |
| Author: | tanshi [ Mon Nov 24, 2014 8:16 am ] |
| Post subject: | wtb: H27 engine, gearbox and every thing else |
Seeing if anything is out there. will take front cuts, or whole xl7 cars at the right price. Brisbane but will look at shipping. would consider swaps for j20 setup for sierra/lj |
|
| Author: | henno [ Mon Nov 24, 2014 9:58 am ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
I'm probably stating the bleeding obvious, so I assume you've seen the XL7 being wrecked that's been on gumtree for a while? Located in Browns Plains, 57,xxx on the clock, motor looks dusty as all hell though so it might have been sitting in a yard for a bit. |
|
| Author: | tanshi [ Mon Nov 24, 2014 10:07 am ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
ive contacted them before and they wanted a shit load for it. guess it might be worth another message |
|
| Author: | ninjamoses [ Mon Nov 24, 2014 10:16 am ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
Later model H27's out of JB grand vits seemed to go for considerably less when I was looking. Might be worth chasing one of those instead if its being used in a custom application where you are going to need to sort out wiring etc anyway. At some point in 2003 on-wards they changed to run a crank angle sensor instead of the camshaft position sensor, and they got the fancy butterfly valve controlled intake manifold for more fasts. |
|
| Author: | tanshi [ Mon Nov 24, 2014 10:20 am ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
my only concern with a later model motor is the possibility of emobilisers and extra computers to try and bypass. |
|
| Author: | atari4x4 [ Mon Nov 24, 2014 10:40 am ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
didn't the later ones also run an ecu controlled alternator?
|
|
| Author: | tanshi [ Mon Nov 24, 2014 10:42 am ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
not sure, but these are all the tings I want to avoid. there is not enough info out there about the later motors yet. |
|
| Author: | atari4x4 [ Mon Nov 24, 2014 10:48 am ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
i'm not really up to speed, but i think that was in the later xl-7's... what ever you buy you'll want to look at doing the chains etc just for piece of mind. |
|
| Author: | tanshi [ Mon Nov 24, 2014 3:00 pm ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
yeah id be doing chains, seals etc. just don't wanna spend $4000 on a whole car to get an engine |
|
| Author: | tanshi [ Wed Nov 26, 2014 12:26 pm ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
lol, local Suzuki dude wants $5000 for an engine. |
|
| Author: | henno [ Wed Nov 26, 2014 12:48 pm ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
Hahahahaha good luck to him. You can buy an entire car for less than that. |
|
| Author: | losfer [ Wed Nov 26, 2014 4:54 pm ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
tanshi wrote: lol, local Suzuki dude wants $5000 for an engine. He did not you bloody liar!!! Lol |
|
| Author: | tanshi [ Wed Nov 26, 2014 6:52 pm ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
Hmmmm |
|
| Author: | tanshi [ Wed Nov 26, 2014 6:53 pm ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
Either way im tossing up a whole car for 3 and a half |
|
| Author: | atari4x4 [ Wed Nov 26, 2014 7:17 pm ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
Check to see if it's got the regular gv steel diff rather than the mong XL-7 one & you could make some quick cash back with that one part. |
|
| Author: | tanshi [ Wed Nov 26, 2014 7:25 pm ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
Good point. But I have no idea what they even look like |
|
| Author: | atari4x4 [ Wed Nov 26, 2014 7:42 pm ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
will dig up some pics & report back. 
|
|
| Author: | Zook_Fan [ Thu Nov 27, 2014 6:45 am ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
Don't worry what they look like, take a magnet or a knife to scratch it and you'll know if it's steel. |
|
| Author: | henno [ Thu Nov 27, 2014 6:51 am ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
The later steel diffs are just a different design/shape and not worth anything to GV owners looking to upgrade their glass diff. EDITED: I has the dumb. |
|
| Author: | Zook_Fan [ Thu Nov 27, 2014 7:19 am ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
Disregard my earlier statement then  . Here's the info: viewtopic.php?f=37&t=43713
|
|
| Author: | tanshi [ Thu Nov 27, 2014 8:11 am ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
nice. good info. the one im looking at is a 2000 model. |
|
| Author: | ninjamoses [ Thu Nov 27, 2014 8:29 am ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
Not all xl7s are steel. Autos were still alloy till ~2003. |
|
| Author: | henno [ Thu Nov 27, 2014 8:34 am ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
 I don't know how I screwed up that wording so badly; I need to not drink on school nights. Original post edited.
|
|
| Author: | tanshi [ Thu Nov 27, 2014 9:07 am ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
bugger its an auto. there goes that |
|
| Author: | atari4x4 [ Thu Nov 27, 2014 7:11 pm ] |
| Post subject: | Re: wtb: H27 engine, gearbox and every thing else |
Zook_Fan wrote: Disregard my earlier statement then . Here's the info: viewtopic.php?f=37&t=43713nope, not the pinion mounts. i'm talking about the last of the XL-7 that have a completely different front diff... as in it's nothing like the pictures in that thread & is useless to anyone, LHS of the housing bolts to the "banjo" part, it's a funky bit of gear, almost looks like it belongs in a toyota. Christover got sold one as a GV steel diff & had pics of it somewhere on here but it looks like he's deleted them. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|